lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/5] Add support for Realtek RTL838x/RTL839x switch SoCs
On Tue, Jan 19, 2021 at 10:21:04AM +0100, Bert Vermeulen wrote:
> v4:
> - Device tree bindings for SoC in separate patch.
> - Removed ioremap.h, and declare physical address bases in device tree.
>
> v3:
> - all code removed, the base system is now only device tree files and docs
> and some build config.
> - ioremap.h restored to the v1 version, with hardcoded I/O ranges, since I
> got flak on changing that as suggested. This brings it in line with other
> systems in arch/mips/generic.
>
> v2:
> - Removed all new arch/mips/ code, using arch/mips/generic/ instead.
> - Use device tree ranges instead of hardcoded addresses for ioremap.
> - Moved IRQ driver to drivers/irqchip/
> - Removed reset handling code, will be replaced by device tree config.
> - All SoC family id code moved to new soc driver.
> - Header moved to realtek/ instead of mach-realtek/
> - As more of the base system now depends on device tree, a sample
> dts for the Cisco SG220-26 switch is included. This will be further
> filled out, and bindings documented, as drivers get merged.
>
> Bert Vermeulen (5):
> dt-bindings: mips: Add support for RTL83xx SoC series
> Add support for Realtek RTL838x/RTL839x switch SoCs
> MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system
> dt-bindings: Add Cisco prefix to vendor list
> mips: dts: Add support for Cisco SG220-26 switch
>
> .../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/mips/Kconfig | 31 ++++++++++
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/realtek/Makefile | 2 +
> arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 ++++++++
> arch/mips/boot/dts/realtek/rtl838x.dtsi | 21 +++++++
> arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 +++++++++++++++++++
> 8 files changed, 165 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml
> create mode 100644 arch/mips/boot/dts/realtek/Makefile
> create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts
> create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi
> create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi

series applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2021-02-04 22:02    [W:0.092 / U:3.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site