lkml.org 
[lkml]   [2021]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/3] Adding the Sparx5 Switch Reset Driver
From
Date
Hi Philipp,

I just wanted to know if there are any outstanding items that you
would like me to handle, or you think that the driver is acceptable as
it is now?

BR
Steen

On Wed, 2021-01-20 at 09:19 +0100, Steen Hegelund wrote:
> This series provides the Microchip Sparx5 Switch Reset Driver
>
> The Sparx5 Switch SoC has a number of components that can be reset
> individually, but at least the Switch Core needs to be in a well
> defined
> state at power on, when any of the Sparx5 drivers starts to access
> the
> Switch Core, this reset driver is available.
>
> The reset driver is loaded early via the postcore_initcall interface,
> and
> will then be available for the other Sparx5 drivers (SGPIO, SwitchDev
> etc)
> that are loaded next, and the first of them to be loaded can perform
> the
> one-time Switch Core reset that is needed.
>
> The driver has protection so that the system busses, DDR controller,
> PCI-E
> and ARM A53 CPU and a few other subsystems are not touched by the
> reset.
>
> The Sparx5 Chip Register Model can be browsed at this location:
> https://github.com/microchip-ung/sparx-5_reginfo
>
> History:
>
> v3 -> v4 Added commit message descriptions
>
> v2 -> v3 Removed unused headers
>          Renamed the reset controller dev member.
>          Use regmap_read_poll_timeout instead of polling a function.
>          Used two separate syscon entries in the binding
>          Simplified the syscon error handling.
>          Simplified the devm_reset_controller_register error
> handling.
>          Moved the contents of the mchp_sparx5_reset_config function
> into
>          the probe function.
>
> v1 -> v2 Removed debug prints
>          Changed the error handling to save the error code before
> jumping.
>
> Steen Hegelund (3):
>   dt-bindings: reset: microchip sparx5 reset driver bindings
>   reset: mchp: sparx5: add switch reset driver
>   arm64: dts: reset: add microchip sparx5 switch reset driver
>
>  .../bindings/reset/microchip,rst.yaml         |  59 +++++++++
>  arch/arm64/boot/dts/microchip/sparx5.dtsi     |  14 +-
>  drivers/reset/Kconfig                         |   8 ++
>  drivers/reset/Makefile                        |   1 +
>  drivers/reset/reset-microchip-sparx5.c        | 120
> ++++++++++++++++++
>  5 files changed, 199 insertions(+), 3 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/reset/microchip,rst.yaml
>  create mode 100644 drivers/reset/reset-microchip-sparx5.c
>


\
 
 \ /
  Last update: 2021-02-03 09:05    [W:0.115 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site