lkml.org 
[lkml]   [2021]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/1] x86,sched: On AMD EPYC set freq_max = max_boost in schedutil invariant formula
Date
Phoronix.com discovered a severe performance regression on AMD EPYC
introduced on schedutil [see link 1] by the following commits from v5.11-rc1

commit 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems")
commit 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")

Furthermore commit db865272d9c4 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from v5.10 made it extremely easy to default to
schedutil even if the preferred driver is acpi_cpufreq. Distros are likely to
build both intel_pstate and acpi_cpufreq on x86, and the presence of the
former removes ondemand from the defaults. This situation amplifies the
visibility of the bug we're addressing.

[link 1] https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1

1. PROBLEM DESCRIPTION : over-utilization and schedutil
2. PROPOSED SOLUTION : raise freq_max in schedutil formula
3. DATA TABLE : image processing benchmark
4. ANALYSIS AND COMMENTS : with over-utilization, freq-invariance is lost

1. PROBLEM DESCRIPTION (over-utilization and schedutil)

The problem happens on CPU-bound workloads spanning a large number of cores.
In this case schedutil won't select the maximum P-State. Actually, it's
likely that it will select the minimum one.

A CPU-bound workload puts the machine in a state generally called
"over-utilization": an increase in CPU speed doesn't result in an increase of
capacity. The fraction of time tasks spend on CPU becomes constant regardless
of clock frequency (the tasks eat whatever we throw at them), and the PELT
invariant util goes up and down with the frequency (i.e. it's not invariant
anymore).

2. PROPOSED SOLUTION (raise freq_max in schedutil formula)

The solution we implement here is a stop-gap one: when the driver is
acpi_cpufreq and the machine an AMD EPYC, schedutil will use max_boost instead
of max_P as the value for freq_max in its formula

freq_next = 1.25 * freq_max * util

essentially giving freq_next some more headroom to grow in the over-utilized
case. This is the approach also followed by intel_pstate in passive mode.

The correct way to attack this problem would be to have schedutil detect
over-utilization and select freq_max irrespective of the util value, which has
no meaning at that point. This approach is too risky for an -rc5 submission so
we defer it to the next cycle.

3. DATA TABLE (image processing benchmark)

What follows is a more detailed account of the effects on a specific test.

TEST : Intel Open Image Denoise, www.openimagedenoise.org
INVOCATION : ./denoise -hdr memorial.pfm -out out.pfm -bench 200 -threads $NTHREADS
CPU : MODEL : 2x AMD EPYC 7742
FREQUENCY TABLE : P2: 1.50 GHz
P1: 2.00 GHz
P0: 2.25 GHz
MAX BOOST : 3.40 GHz

Results: threads, msecs (ratio). Lower is better.

v5.10 v5.11-rc4 v5.11-rc4-patch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 1069.85 (1.00) 1071.84 (1.00) 1070.42 (1.00)
2 542.24 (1.00) 544.40 (1.00) 544.48 (1.00)
4 278.00 (1.00) 278.44 (1.00) 277.72 (1.00)
8 149.81 (1.00) 149.61 (1.00) 149.87 (1.00)
16 79.01 (1.00) 79.31 (1.00) 78.94 (1.00)
24 58.01 (1.00) 58.51 (1.01) 58.15 (1.00)
32 46.58 (1.00) 48.30 (1.04) 46.66 (1.00)
48 37.29 (1.00) 51.29 (1.38) 37.27 (1.00)
64 34.01 (1.00) 49.59 (1.46) 33.71 (0.99)
80 31.09 (1.00) 44.27 (1.42) 31.33 (1.01)
96 28.56 (1.00) 40.82 (1.43) 28.47 (1.00)
112 28.09 (1.00) 40.06 (1.43) 28.63 (1.02)
120 28.73 (1.00) 39.78 (1.38) 28.14 (0.98)
128 28.93 (1.00) 39.60 (1.37) 29.38 (1.02)

See how the 128 threads case is almost 40% worse than baseline in v5.11-rc4.

4. ANALYSIS AND COMMENTS (with over-utilization freq-invariance is lost)

Statistics for NTHREADS=128 (number of physical cores of the machine)

v5.10 v5.11-rc4
~~~~~~~~~~~~~~~~~~~~~~~~
CPU activity (mpstat) 80-90% 80-90%
schedutil requests (tracepoint) always P0 mostly P2
CPU frequency (HW feedback) ~2.2 GHz ~1.5 GHz
PELT root rq util (tracepoint) ~825 ~450

mpstat shows that the workload is CPU-bound and usage doesn't change with
clock speed. What is striking is that the PELT util of any root runqueue in
v5.11-rc4 is half of what used to be before the frequency invariant support
(v5.10), leading to wrong frequency choices. How did we get there?

This workload is constant in time, so instead of using the PELT sum we can
pretend that scale invariance is obtained with

util_inv = util_raw * freq_curr / freq_max1 [formula-1]

where util_raw is the PELT util from v5.10 (which is to say, not invariant),
and util_inv is the PELT util from v5.11-rc4. freq_max1 comes from
commit 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for
frequency invariance on AMD EPYC") and is (P0+max_boost)/2 = (2.25+3.4)/2 =
2.825 GHz. Then we have the schedutil formula

freq_next = 1.25 * freq_max2 * util_inv [formula-2]

Here v5.11-rc4 uses freq_max2 = P0 = 2.25 GHz (and this patch changes it to
3.4 GHz).

Since all cores are busy, there is no boost available. Let's be generous and say
the tasks initially get P0, i.e. freq_curr = 2.25 GHz. Combining the formulas
above and taking util_raw = 825/1024 = 0.8, freq_next is:

freq_next = 1.25 * 2.25 * 0.8 * 2.25 / 2.825 = 1.79 GHz

After quantization (pick the next frequency up in the table), freq_next is
P1 = 2.0 GHz. See how we lost 250 MHz in the process. Iterate once more,
freq_next become 1.59 GHz. Since it's > P2, it's saved by quantization and P1
is selected, but if util_raw fluctuates a little and goes below 0.75, P0 is
selected and that kills util_inv by formula-1, which gives util_inv = 0.4.

The culprit of the problem is that with over-utilization, util_raw and
freq_curr in formula-1 are independent. In the nominal case, if freq_curr goes
up then util_raw goes down and viceversa. Here util_raw doesn't care and stays
constant. If freq_curr descrease, util_inv decreases too and so forth (it's a
feedback loop).

Fixes: 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Reported-by: Michael Larabel <Michael@phoronix.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
---
drivers/cpufreq/acpi-cpufreq.c | 61 ++++++++++++++++++++++++++++++--
drivers/cpufreq/cpufreq.c | 3 ++
include/linux/cpufreq.h | 5 +++
kernel/sched/cpufreq_schedutil.c | 8 +++--
4 files changed, 73 insertions(+), 4 deletions(-)

diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 1e4fbb002a31..a5facc6cad16 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -26,6 +26,7 @@
#include <linux/uaccess.h>

#include <acpi/processor.h>
+#include <acpi/cppc_acpi.h>

#include <asm/msr.h>
#include <asm/processor.h>
@@ -628,11 +629,57 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
}
#endif

+#ifdef CONFIG_ACPI_CPPC_LIB
+static bool amd_max_boost(unsigned int max_freq,
+ unsigned int *max_boost)
+{
+ struct cppc_perf_caps perf_caps;
+ u64 highest_perf, nominal_perf, perf_ratio;
+ int ret;
+
+ ret = cppc_get_perf_caps(0, &perf_caps);
+ if (ret) {
+ pr_debug("Could not retrieve perf counters (%d)\n", ret);
+ return false;
+ }
+
+ highest_perf = perf_caps.highest_perf;
+ nominal_perf = perf_caps.nominal_perf;
+
+ if (!highest_perf || !nominal_perf) {
+ pr_debug("Could not retrieve highest or nominal performance\n");
+ return false;
+ }
+
+ perf_ratio = div_u64(highest_perf * SCHED_CAPACITY_SCALE, nominal_perf);
+ if (perf_ratio <= SCHED_CAPACITY_SCALE) {
+ pr_debug("Either perf_ratio is 0, or nominal >= highest performance\n");
+ return false;
+ }
+
+ *max_boost = max_freq * perf_ratio >> SCHED_CAPACITY_SHIFT;
+ if (!*max_boost) {
+ pr_debug("max_boost seems to be zero\n");
+ return false;
+ }
+
+ return true;
+}
+#else
+static bool amd_max_boost(unsigned int max_freq,
+ unsigned int *max_boost)
+{
+ return false;
+}
+#endif
+
static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
unsigned int i;
unsigned int valid_states = 0;
unsigned int cpu = policy->cpu;
+ unsigned int freq, max_freq = 0;
+ unsigned int max_boost;
struct acpi_cpufreq_data *data;
unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
@@ -779,15 +826,25 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
freq_table[valid_states-1].frequency / 1000)
continue;

+ freq = perf->states[i].core_frequency * 1000;
freq_table[valid_states].driver_data = i;
- freq_table[valid_states].frequency =
- perf->states[i].core_frequency * 1000;
+ freq_table[valid_states].frequency = freq;
+
+ if (freq > max_freq)
+ max_freq = freq;
+
valid_states++;
}
freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
policy->freq_table = freq_table;
perf->state = 0;

+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ amd_max_boost(max_freq, &max_boost)) {
+ policy->cpuinfo.max_boost = max_boost;
+ static_branch_enable(&cpufreq_amd_max_boost);
+ }
+
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
/*
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index d0a3525ce27f..b96677f6b57e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2721,6 +2721,9 @@ int cpufreq_boost_enabled(void)
}
EXPORT_SYMBOL_GPL(cpufreq_boost_enabled);

+DEFINE_STATIC_KEY_FALSE(cpufreq_amd_max_boost);
+EXPORT_SYMBOL_GPL(cpufreq_amd_max_boost);
+
/*********************************************************************
* REGISTER / UNREGISTER CPUFREQ DRIVER *
*********************************************************************/
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 9c8b7437b6cd..341cac76d254 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -40,9 +40,14 @@ enum cpufreq_table_sorting {
CPUFREQ_TABLE_SORTED_DESCENDING
};

+DECLARE_STATIC_KEY_FALSE(cpufreq_amd_max_boost);
+
+#define cpufreq_driver_has_max_boost() static_branch_unlikely(&cpufreq_amd_max_boost)
+
struct cpufreq_cpuinfo {
unsigned int max_freq;
unsigned int min_freq;
+ unsigned int max_boost;

/* in 10^(-9) s = nanoseconds */
unsigned int transition_latency;
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 6931f0cdeb80..541f3db3f576 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -159,8 +159,12 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy,
unsigned long util, unsigned long max)
{
struct cpufreq_policy *policy = sg_policy->policy;
- unsigned int freq = arch_scale_freq_invariant() ?
- policy->cpuinfo.max_freq : policy->cur;
+ unsigned int freq, max_freq;
+
+ max_freq = cpufreq_driver_has_max_boost() ?
+ policy->cpuinfo.max_boost : policy->cpuinfo.max_freq;
+
+ freq = arch_scale_freq_invariant() ? max_freq : policy->cur;

freq = map_util_freq(util, freq, max);

--
2.26.2
\
 
 \ /
  Last update: 2021-02-03 14:56    [W:0.112 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site