lkml.org 
[lkml]   [2021]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/1] x86,sched: On AMD EPYC set freq_max = max_boost in schedutil invariant formula
From
Date
Hello,

both Rafael and Viresh make a similar remark: why adding a new "max_boost"
variable, since "max_freq" is already available and could be used instead.

Replying here to both.

On Tue, 2021-02-02 at 20:26 +0100, Rafael J. Wysocki wrote:
> On Tue, Feb 2, 2021 at 7:59 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
> >
> > On Fri, Jan 22, 2021 at 9:47 PM Giovanni Gherdovich <ggherdovich@suse.cz> wrote:
> >
> > [cut]
> > > @@ -779,15 +829,25 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > > freq_table[valid_states-1].frequency / 1000)
> > > continue;
> > >
> > > + freq = perf->states[i].core_frequency * 1000;
> > > freq_table[valid_states].driver_data = i;
> > > - freq_table[valid_states].frequency =
> > > - perf->states[i].core_frequency * 1000;
> > > + freq_table[valid_states].frequency = freq;
> > > +
> > > + if (freq > max_freq)
> > > + max_freq = freq;
> > > +
> > > valid_states++;
> > > }
> > > freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
> > > policy->freq_table = freq_table;
> > > perf->state = 0;
> > >
> > > + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
> > > + amd_max_boost(max_freq, &max_boost)) {
> > > + policy->cpuinfo.max_boost = max_boost;
> >
> > Why not to set max_freq to max_boost instead?
>
> I mean, would setting the frequency in the last table entry to max_boost work?
>
> Alternatively, one more (artificial) entry with the frequency equal to
> max_boost could be added.

On Wed, 2021-02-03 at 11:34 +0530, Viresh Kumar wrote:
> [cut]
>
> On 22-01-21, 21:40, Giovanni Gherdovich wrote:
> > diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
> > index 6931f0cdeb80..541f3db3f576 100644
> > --- a/kernel/sched/cpufreq_schedutil.c
> > +++ b/kernel/sched/cpufreq_schedutil.c
> > @@ -159,8 +159,12 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy,
> > unsigned long util, unsigned long max)
> > {
> > struct cpufreq_policy *policy = sg_policy->policy;
> > - unsigned int freq = arch_scale_freq_invariant() ?
> > - policy->cpuinfo.max_freq : policy->cur;
> > + unsigned int freq, max_freq;
> > +
> > + max_freq = cpufreq_driver_has_max_boost() ?
> > + policy->cpuinfo.max_boost : policy->cpuinfo.max_freq;
>
> Also, can't we update max_freq itself from the cpufreq driver? What
> troubles will it cost ?

I could add the max boost frequency to the frequency table (and
policy->cpuinfo.max_freq would follow), yes, but that would trigger the
following warning from acpi-cpufreq.c:

static void acpi_cpufreq_cpu_ready(struct cpufreq_policy *policy)
{
struct acpi_processor_performance *perf = per_cpu_ptr(acpi_perf_data,
policy->cpu);

if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
pr_warn(FW_WARN "P-state 0 is not max freq\n");
}

so I thought that to stay out of troubles I'd supply a different variable,
max_boost, to be used only in the schedutil formula. After schedutil
figures out a desired next_freq then the usual comparison with the
firmware-supplied frequency table could take place.

Altering the frequency table seemed more invasive because once a freq value is
in there, it's going to be actually requested by the driver to the platform. I
only want my max_boost to stretch the range of schedutil's next_freq.

On Tue, 2021-02-02 at 19:59 +0100, Rafael J. Wysocki wrote:
>
> [cut]
> Also notice that the static branch is global and the max_boost value
> for different CPUs may be different, at least in theory.

In theory yes, but I'm guarding the code with two conditions:

* vendor is X86_VENDOR_AMD
* cppc_get_perf_caps() returns success

this identifies AMD EPYC cpus with model 7xx2 and later, where max_boost is
the same on all cores. I may have added synchronization so that only one cpu
sets the value, but I didn't in the interest of simplicity for an -rc patch
(I'd have to consider hotplug, the maxcpus= command line param, ecc).


Giovanni

\
 
 \ /
  Last update: 2021-02-03 09:42    [W:0.086 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site