lkml.org 
[lkml]   [2021]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [PATCH 1/1] iscsi_ibft: KASAN false positive failure occurs in ibft_init()
    Hey Dmitry, Rafael, George, please see below..

    On Wed, Jan 27, 2021 at 10:10:07PM +0100, Dmitry Vyukov wrote:
    > On Wed, Jan 27, 2021 at 9:01 PM George Kennedy
    > <george.kennedy@oracle.com> wrote:
    > >
    > > Hi Dmitry,
    > >
    > > On 1/27/2021 1:48 PM, Dmitry Vyukov wrote:
    > >
    > > On Wed, Jan 27, 2021 at 7:44 PM Konrad Rzeszutek Wilk
    > > <konrad.wilk@oracle.com> wrote:
    > >
    > > On Tue, Jan 26, 2021 at 01:03:21PM -0500, George Kennedy wrote:
    > >
    > > During boot of kernel with CONFIG_KASAN the following KASAN false
    > > positive failure will occur when ibft_init() reads the
    > > ACPI iBFT table: BUG: KASAN: use-after-free in ibft_init
    > >
    > > The ACPI iBFT table is not allocated, and the iscsi driver uses
    > > a pointer to it to calculate checksum, etc. KASAN complains
    > > about this pointer with use-after-free, which this is not.
    > >
    > > Andrey, Alexander, Dmitry,
    > >
    > > I think this is the right way for this, but was wondering if you have
    > > other suggestions?
    > >
    > > Thanks!
    > >
    > > Hi George, Konrad,
    > >
    > > Please provide a sample KASAN report and kernel version to match line numbers.
    > >
    > > 5.4.17-2102.200.0.0.20210106_0000
    > >
    > > [ 24.413536] iBFT detected.
    > > [ 24.414074]
    > > ==================================================================
    > > [ 24.407342] BUG: KASAN: use-after-free in ibft_init+0x134/0xb8b
    > > [ 24.407342] Read of size 4 at addr ffff8880be452004 by task swapper/0/1
    > > [ 24.407342]
    > > [ 24.407342] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.17-2102.200.0.0.20210106_0000.syzk #1
    > > [ 24.407342] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    > > [ 24.407342] Call Trace:
    > > [ 24.407342] dump_stack+0xd4/0x119
    > > [ 24.407342] ? ibft_init+0x134/0xb8b
    > > [ 24.407342] print_address_description.constprop.6+0x20/0x220
    > > [ 24.407342] ? ibft_init+0x134/0xb8b
    > > [ 24.407342] ? ibft_init+0x134/0xb8b
    > > [ 24.407342] __kasan_report.cold.9+0x37/0x77
    > > [ 24.407342] ? ibft_init+0x134/0xb8b
    > > [ 24.407342] kasan_report+0x14/0x1b
    > > [ 24.407342] __asan_report_load_n_noabort+0xf/0x11
    > > [ 24.407342] ibft_init+0x134/0xb8b
    > > [ 24.407342] ? dmi_sysfs_init+0x1a5/0x1a5
    > > [ 24.407342] ? dmi_walk+0x72/0x89
    > > [ 24.407342] ? ibft_check_initiator_for+0x159/0x159
    > > [ 24.407342] ? rvt_init_port+0x110/0x101
    > > [ 24.407342] ? ibft_check_initiator_for+0x159/0x159
    > > [ 24.407342] do_one_initcall+0xc3/0x44d
    > > [ 24.407342] ? perf_trace_initcall_level+0x410/0x405
    > > [ 24.407342] kernel_init_freeable+0x551/0x673
    > > [ 24.407342] ? start_kernel+0x94b/0x94b
    > > [ 24.407342] ? __sanitizer_cov_trace_const_cmp1+0x1a/0x1c
    > > [ 24.407342] ? __kasan_check_write+0x14/0x16
    > > [ 24.407342] ? rest_init+0xe6/0xe6
    > > [ 24.407342] kernel_init+0x16/0x1bd
    > > [ 24.407342] ? rest_init+0xe6/0xe6
    > > [ 24.407342] ret_from_fork+0x2b/0x36
    > > [ 24.407342]
    > > [ 24.407342] The buggy address belongs to the page:
    > > [ 24.407342] page:ffffea0002f91480 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1
    > > [ 24.407342] flags: 0xfffffc0000000()
    > > [ 24.407342] raw: 000fffffc0000000 ffffea0002fca588 ffffea0002fb1a88 0000000000000000
    > > [ 24.407342] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
    > > [ 24.407342] page dumped because: kasan: bad access detected
    > > [ 24.407342]
    > > [ 24.407342] Memory state around the buggy address:
    > > [ 24.407342] ffff8880be451f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    > > [ 24.407342] ffff8880be451f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    > > [ 24.407342] >ffff8880be452000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    > > [ 24.407342] ^
    > > [ 24.407342] ffff8880be452080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    > > [ 24.407342] ffff8880be452100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    > > [ 24.407342]
    > > ==================================================================
    > > [ 24.407342] Disabling lock debugging due to kernel taint
    > > [ 24.451021] Kernel panic - not syncing: panic_on_warn set ...
    > > [ 24.452002] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 5.4.17-2102.200.0.0.20210106_0000.syzk #1
    > > [ 24.452002] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    > > [ 24.452002] Call Trace:
    > > [ 24.452002] dump_stack+0xd4/0x119
    > > [ 24.452002] ? ibft_init+0x102/0xb8b
    > > [ 24.452002] panic+0x28f/0x6e0
    > > [ 24.452002] ? __warn_printk+0xe0/0xe0
    > > [ 24.452002] ? ibft_init+0x134/0xb8b
    > > [ 24.452002] ? add_taint+0x68/0xb3
    > > [ 24.452002] ? add_taint+0x68/0xb3
    > > [ 24.452002] ? ibft_init+0x134/0xb8b
    > > [ 24.452002] ? ibft_init+0x134/0xb8b
    > > [ 24.452002] end_report+0x4c/0x54
    > > [ 24.452002] __kasan_report.cold.9+0x55/0x77
    > > [ 24.452002] ? ibft_init+0x134/0xb8b
    > > [ 24.452002] kasan_report+0x14/0x1b
    > > [ 24.452002] __asan_report_load_n_noabort+0xf/0x11
    > > [ 24.452002] ibft_init+0x134/0xb8b
    > > [ 24.452002] ? dmi_sysfs_init+0x1a5/0x1a5
    > > [ 24.452002] ? dmi_walk+0x72/0x89
    > > [ 24.452002] ? ibft_check_initiator_for+0x159/0x159
    > > [ 24.452002] ? rvt_init_port+0x110/0x101
    > > [ 24.452002] ? ibft_check_initiator_for+0x159/0x159
    > > [ 24.452002] do_one_initcall+0xc3/0x44d
    > > [ 24.452002] ? perf_trace_initcall_level+0x410/0x405
    > > [ 24.452002] kernel_init_freeable+0x551/0x673
    > > [ 24.452002] ? start_kernel+0x94b/0x94b
    > > [ 24.452002] ? __sanitizer_cov_trace_const_cmp1+0x1a/0x1c
    > > [ 24.452002] ? __kasan_check_write+0x14/0x16
    > > [ 24.452002] ? rest_init+0xe6/0xe6
    > > [ 24.452002] kernel_init+0x16/0x1bd
    > > [ 24.452002] ? rest_init+0xe6/0xe6
    > > [ 24.452002] ret_from_fork+0x2b/0x36
    > > [ 24.452002] Dumping ftrace buffer:
    > > [ 24.452002] ---------------------------------
    > > [ 24.452002] swapper/-1 1.... 24564337us : rdmaip_init: 2924: rdmaip_init: Active Bonding is DISABLED
    > > [ 24.452002] ---------------------------------
    > > [ 24.452002] Kernel Offset: disabled
    > > [ 24.452002] Rebooting in 1 seconds..
    > >
    > > Why does KASAN think the address is freed? For that to happen that
    > > memory should have been freed. I don't remember any similar false
    > > positives from KASAN, so this looks a bit suspicious.
    > >
    > > I'm not sure why KASAN thinks the address is freed. There are other modules where KASAN/KCOV is disabled on boot.
    > > Could this be for a similar reason?
    >
    > Most of these files are disabled because they cause recursion in
    > instrumentation, or execute too early in bootstrap process (before
    > kasan_init).
    >
    > Somehow the table pointer in ibft_init points to a freed page. I
    > tracked it down to here:
    > https://elixir.bootlin.com/linux/v5.4.17/source/drivers/acpi/acpica/tbutils.c#L399
    > but I can't find where this table_desc->pointer comes from. Perhaps it

    It is what the BIOS generated. It usually points to some memory
    location in right under 4GB and the BIOS stashes the DSDT, iBFT, and
    other tables in there.

    > uses some allocation method that's not supported by KASAN? However,
    > it's the only such case that I've seen, so it's a bit weird. Could it
    > use something like memblock_alloc? Or maybe that page was in fact
    > freed?... Too bad KASAN does not print free stack for pages, maybe
    > it's not too hard to do if CONFIG_PAGE_OWNER is enabled...

    Hm, there is a comment in the acpi_get_table speaking about the
    requirement of having a acpi_put_table and:


    * DESCRIPTION: Finds and verifies an ACPI table. Table must be in the
    * RSDT/XSDT.
    * Note that an early stage acpi_get_table() call must be paired
    * with an early stage acpi_put_table() call. otherwise the table
    * pointer mapped by the early stage mapping implementation may be
    * erroneously unmapped by the late stage unmapping implementation
    * in an acpi_put_table() invoked during the late stage.
    *

    Which would imply that I should use acpi_put_table in the error path
    (see below a patch), but also copy the structure instead of depending
    on ACPI keeping it mapped for me. I think.

    CC-ing Rafeal.


    From c37da50fdfc62cd4f7b23562b55661478c90a17d Mon Sep 17 00:00:00 2001
    From: Konrad Rzeszutek Wilk <konrad@darnok.org>
    Date: Tue, 2 Feb 2021 17:28:28 +0000
    Subject: [PATCH] ibft: Put ibft_addr back

    Signed-off-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
    ---
    drivers/firmware/iscsi_ibft.c | 19 +++++++++++++------
    1 file changed, 13 insertions(+), 6 deletions(-)

    diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
    index 7127a04..2a1a033 100644
    --- a/drivers/firmware/iscsi_ibft.c
    +++ b/drivers/firmware/iscsi_ibft.c
    @@ -811,6 +811,10 @@ static void ibft_cleanup(void)
    ibft_unregister();
    iscsi_boot_destroy_kset(boot_kset);
    }
    + if (ibft_addr) {
    + acpi_put_table((struct acpi_table_header *)ibft_addr);
    + ibft_addr = NULL;
    + }
    }

    static void __exit ibft_exit(void)
    @@ -835,13 +839,15 @@ static void __init acpi_find_ibft_region(void)
    {
    int i;
    struct acpi_table_header *table = NULL;
    + acpi_status status;

    if (acpi_disabled)
    return;

    for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
    - acpi_get_table(ibft_signs[i].sign, 0, &table);
    - ibft_addr = (struct acpi_table_ibft *)table;
    + status = acpi_get_table(ibft_signs[i].sign, 0, &table);
    + if (ACPI_SUCCESS(status))
    + ibft_addr = (struct acpi_table_ibft *)table;
    }
    }
    #else
    @@ -870,12 +876,13 @@ static int __init ibft_init(void)

    rc = ibft_check_device();
    if (rc)
    - return rc;
    + goto out_free;

    boot_kset = iscsi_boot_create_kset("ibft");
    - if (!boot_kset)
    - return -ENOMEM;
    -
    + if (!boot_kset) {
    + rc = -ENOMEM;
    + goto out_free;
    + }
    /* Scan the IBFT for data and register the kobjects. */
    rc = ibft_register_kobjects(ibft_addr);
    if (rc)
    --
    1.8.3.1
    \
     
     \ /
      Last update: 2021-02-03 20:31    [W:3.075 / U:0.568 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site