lkml.org 
[lkml]   [2021]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V3 07/14] coresight: etm-perf: Handle stale output handles
On Wed, Jan 27, 2021 at 02:25:31PM +0530, Anshuman Khandual wrote:
> From: Suzuki K Poulose <suzuki.poulose@arm.com>
>
> The context associated with an ETM for a given perf event
> includes :
> - handle -> the perf output handle for the AUX buffer.
> - the path for the trace components
> - the buffer config for the sink.
>
> The path and the buffer config are part of the "aux_priv" data
> (etm_event_data) setup by the setup_aux() callback, and made available
> via perf_get_aux(handle).
>
> Now with a sink supporting IRQ, the sink could "end" an output
> handle when the buffer reaches the programmed limit and would try
> to restart a handle. This could fail if there is not enough
> space left the AUX buffer (e.g, the userspace has not consumed
> the data). This leaves the "handle" disconnected from the "event"
> and also the "perf_get_aux()" cleared. This all happens within
> the sink driver, without the etm_perf driver being aware.
> Now when the event is actually stopped, etm_event_stop()
> will need to access the "event_data". But since the handle
> is not valid anymore, we loose the information to stop the
> "trace" path. So, we need a reliable way to access the etm_event_data
> even when the handle may not be active.
>
> This patch replaces the per_cpu handle array with a per_cpu context
> for the ETM, which tracks the "handle" as well as the "etm_event_data".
> The context notes the etm_event_data at etm_event_start() and clears
> it at etm_event_stop(). This makes sure that we don't access a
> stale "etm_event_data" as we are guaranteed that it is not
> freed by free_aux() as long as the event is active and tracing,
> also provides us with access to the critical information
> needed to wind up a session even in the absence of an active
> output_handle.
>
> This is not an issue for the legacy sinks as none of them supports
> an IRQ and is centrally handled by the etm-perf.
>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Anshuman Khandual <anshuman.khandual@arm.com>
> Cc: Leo Yan <leo.yan@linaro.org>
> Cc: Mike Leach <mike.leach@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> ---
> drivers/hwtracing/coresight/coresight-etm-perf.c | 45 +++++++++++++++++++++---
> 1 file changed, 40 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
> index eb9e7e9..a3977b0 100644
> --- a/drivers/hwtracing/coresight/coresight-etm-perf.c
> +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
> @@ -24,7 +24,26 @@
> static struct pmu etm_pmu;
> static bool etm_perf_up;
>
> -static DEFINE_PER_CPU(struct perf_output_handle, ctx_handle);
> +/*
> + * An ETM context for a running event includes the perf aux handle
> + * and aux_data. For ETM, the aux_data (etm_event_data), consists of
> + * the trace path and the sink configuration. The event data is accessible
> + * via perf_get_aux(handle). However, a sink could "end" a perf output
> + * handle via the IRQ handler. And if the "sink" encounters a failure
> + * to "begin" another session (e.g due to lack of space in the buffer),
> + * the handle will be cleared. Thus, the event_data may not be accessible
> + * from the handle when we get to the etm_event_stop(), which is required
> + * for stopping the trace path. The event_data is guaranteed to stay alive
> + * until "free_aux()", which cannot happen as long as the event is active on
> + * the ETM. Thus the event_data for the session must be part of the ETM context
> + * to make sure we can disable the trace path.
> + */
> +struct etm_ctxt {
> + struct perf_output_handle handle;
> + struct etm_event_data *event_data;
> +};
> +
> +static DEFINE_PER_CPU(struct etm_ctxt, etm_ctxt);
> static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
>
> /* ETMv3.5/PTM's ETMCR is 'config' */
> @@ -332,7 +351,8 @@ static void etm_event_start(struct perf_event *event, int flags)
> {
> int cpu = smp_processor_id();
> struct etm_event_data *event_data;
> - struct perf_output_handle *handle = this_cpu_ptr(&ctx_handle);
> + struct etm_ctxt *ctxt = this_cpu_ptr(&etm_ctxt);
> + struct perf_output_handle *handle = &ctxt->handle;
> struct coresight_device *sink, *csdev = per_cpu(csdev_src, cpu);
> struct list_head *path;
>
if (!csdev)
goto fail;

/*
* Something went wrong if an event data is already associated
* with a context.
*/
if (WARN_ONE(ctxt->event_data))
goto fail;

> @@ -374,6 +394,8 @@ static void etm_event_start(struct perf_event *event, int flags)
> if (source_ops(csdev)->enable(csdev, event, CS_MODE_PERF))
> goto fail_disable_path;
>
> + /* Save the event_data for this ETM */
> + ctxt->event_data = event_data;
> out:
> return;
>
> @@ -392,13 +414,20 @@ static void etm_event_stop(struct perf_event *event, int mode)
> int cpu = smp_processor_id();
> unsigned long size;
> struct coresight_device *sink, *csdev = per_cpu(csdev_src, cpu);
> - struct perf_output_handle *handle = this_cpu_ptr(&ctx_handle);
> - struct etm_event_data *event_data = perf_get_aux(handle);
> + struct etm_ctxt *ctxt = this_cpu_ptr(&etm_ctxt);
> + struct perf_output_handle *handle = &ctxt->handle;

struct etm_event_data *event_data = perf_get_aux(handle);
> struct list_head *path;
>

if (WARN_ON(event_data && event_data != ctxt->event_data))
return;

event_data = ctxt->event_data;
/* Clear the event_data as this ETM is stopping the trace. */
ctxt->event_data = NULL;

With the above:

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> if (event->hw.state == PERF_HES_STOPPED)
> return;
>
> + /* We must have a valid event_data for a running event */
> + if (WARN_ON(!event_data))
> + return;
> +
> if (!csdev)
> return;
>
> @@ -416,7 +445,13 @@ static void etm_event_stop(struct perf_event *event, int mode)
> /* tell the core */
> event->hw.state = PERF_HES_STOPPED;
>
> - if (mode & PERF_EF_UPDATE) {
> + /*
> + * If the handle is not bound to an event anymore
> + * (e.g, the sink driver was unable to restart the
> + * handle due to lack of buffer space), we don't
> + * have to do anything here.
> + */
> + if (handle->event && (mode & PERF_EF_UPDATE)) {
> if (WARN_ON_ONCE(handle->event != event))
> return;
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2021-02-03 20:07    [W:0.730 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site