lkml.org 
[lkml]   [2021]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
On Fri, Feb 26, 2021 at 07:46:01AM +0100, Oleksij Rempel wrote:
> On Wed, Feb 24, 2021 at 05:20:21PM +0900, William Breathitt Gray wrote:
> > On Wed, Feb 24, 2021 at 05:11:03PM +0900, William Breathitt Gray wrote:
> > > On Wed, Feb 24, 2021 at 08:35:06AM +0100, Oleksij Rempel wrote:
> > > > On Wed, Feb 24, 2021 at 11:34:06AM +0900, William Breathitt Gray wrote:
> > > > > Alternatively, we can take a more generic approach: ignore the GPIO
> > > > > names and focus solely on the IRQ lines; because the GPIO lines will
> > > > > always be tied to respective IRQ lines here, using the IRQ as the basis
> > > > > of the name should always be valid. The "name" member of the struct
> > > > > irq_chip can work for this. I haven't tested this, but I think something
> > > > > like this would work:
> > > > >
> > > > > cnt_signals[0].name = irq_get_chip(priv->irq)->name;
> > > >
> > > > ok, i'll take a look at it.
> > >
> > > If that doesn't work, then use devm_kasprintf() to generate the name
> > > based on the IRQ line number. The idea here is that the user should be
> > > able to identify that the Signal component for this Count is the
> > > respective IRQ.
> > >
> > > William Breathitt Gray
> >
> > I realized that these irq_chip names are often just the device name
> > which isn't very useful either. :-(
> >
> > In that case, I suppose we really are just left with generating the name
> > based on the IRQ line number then. This should be fine then:
> >
> > cnt_signals[0].name = devm_kasprintf(dev, GFP_KERNEL, "IRQ %d",
> > priv->irq);
> > if (!cnt_signals[0].name)
> > return -ENOMEM;
> >
> > I think this would make it clear to the user that this Signal is the
> > respective IRQ (whether sourced from GPIO or not).
>
> ack, with one correction. cnt_signals should be allocated, otherwise
> this value will be set per driver not per device.
>
> Regards,
> Oleksij
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

Yes you're right, cnt_signals will need to be allocated then because
these will be different per device.

Thanks,

William Breathitt Gray
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-02-26 08:00    [W:0.153 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site