lkml.org 
[lkml]   [2021]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] mmc: core: add a power cycle when CMD11 fails
Date
Dear Maintainers and commiters.

Please review this patch for updating.

Thanks and regards.
DooHyun Hwang.

On 17/02/10 4:59 am, DooHyun Hwang wrote:
>Subject: [PATCH] mmc: core: add a power cycle when CMD11 fails
>
>A power cycle is required if CMD11 fails.
>CMD11 failure should be handled as no response.
>
>If there is a timeout error that means no response to the CMD11, do not
>send the CMD11 again and the power cycle is required.
>Any other errors for CMD11 are the same because CMD11 failed.
>
>On some bad SD Card, CMD11 may fail but the card may have already invoked
>the voltage switch sequence.
>In this case, it is necessary to retry without voltage switching after
>power cycle.
>
>Signed-off-by: DooHyun Hwang <dh0421.hwang@samsung.com>

\
 
 \ /
  Last update: 2021-02-25 08:47    [W:0.524 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site