lkml.org 
[lkml]   [2021]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] Add I2S-MCC support for Microchip's SAMA7G5
Date
SAMA7G5 includes an updated version of I2S-MCC, found previously on
SAM9X60. This controller includes 8 data pins, 4 for playback and 4 for
capture. For I2S and LEFT_J formats, these pins can be used to
send/receive up to 8 audio channels. For DSP_A, with TDM, any pins pair
(DIN/DOUT) from these 4 can be selected to send/receive data. This
version also includes 2 FIFOs (send and receive).
This patch set starts by moving the driver's bindings to yaml and
continues with adding a new compatible for the SAMA7G5 variant, followed
by the changes needed for I2S/LEFT_J support, TDM pin pair selection and
FIFO support, exclusively for SAMA7G5.

Codrin Ciubotariu (7):
ASoC: convert Microchip I2SMCC binding to yaml
dt-bindings: mchp,i2s-mcc: Add SAMA7G5 to binding
ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5
ASoC: mchp-i2s-mcc: Add multi-channel support for I2S and LEFT_J
formats
dt-bindings: mchp,i2s-mcc: Add property to specify pin pair for TDM
ASoC: mchp-i2s-mcc: Add support to select TDM pins
ASoC: mchp-i2s-mcc: Add FIFOs support

.../bindings/sound/mchp,i2s-mcc.yaml | 108 ++++++++++++
.../bindings/sound/mchp-i2s-mcc.txt | 43 -----
sound/soc/atmel/Kconfig | 3 +
sound/soc/atmel/mchp-i2s-mcc.c | 161 +++++++++++++++---
4 files changed, 252 insertions(+), 63 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt

--
2.27.0

\
 
 \ /
  Last update: 2021-02-23 19:22    [W:0.050 / U:23.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site