lkml.org 
[lkml]   [2021]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RESEND v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies
Hey Hsin-Yi,

Thanks for the patch, and sorry about the delays in reviewing this.

This patch does not apply to the drm-misc/for-linux-next branch due to
some other changes having been merged.

On Sat, 20 Feb 2021 at 07:10, Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> anx7625 requires 3 power supply regulators.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> .../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 60585a4fc22bc..3ae97d9523e56 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -34,6 +34,15 @@ properties:
> description: used for reset chip control, RESET_N pin B7.
> maxItems: 1
>
> + vdd10-supply:
> + description: Regulator that provides the supply 1.0V power.
> +
> + vdd18-supply:
> + description: Regulator that provides the supply 1.8V power.
> +
> + vdd33-supply:
> + description: Regulator that provides the supply 3.3V power.
> +

This chunk below has seen some changes.

With this patch fixed, feel free to add my r-b.
Reviewed-by: Robert Foss <robert.foss@linaro.org>

> ports:
> type: object
>
> @@ -55,6 +64,9 @@ properties:
> required:
> - compatible
> - reg
> + - vdd10-supply
> + - vdd18-supply
> + - vdd33-supply
> - ports
>
> additionalProperties: false
> @@ -72,6 +84,9 @@ examples:
> reg = <0x58>;
> enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> + vdd10-supply = <&pp1000_mipibrdg>;
> + vdd18-supply = <&pp1800_mipibrdg>;
> + vdd33-supply = <&pp3300_mipibrdg>;
>
> ports {
> #address-cells = <1>;
> --
> 2.30.0.617.g56c4b15f3c-goog
>

\
 
 \ /
  Last update: 2021-02-23 16:01    [W:0.030 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site