lkml.org 
[lkml]   [2021]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] vdpa/mlx5: set_features should allow reset to zero
From
Date

On 2021/2/23 6:01 下午, Michael S. Tsirkin wrote:
> On Tue, Feb 23, 2021 at 05:46:20PM +0800, Jason Wang wrote:
>> On 2021/2/23 下午5:25, Michael S. Tsirkin wrote:
>>> On Mon, Feb 22, 2021 at 09:09:28AM -0800, Si-Wei Liu wrote:
>>>> On 2/21/2021 8:14 PM, Jason Wang wrote:
>>>>> On 2021/2/19 7:54 下午, Si-Wei Liu wrote:
>>>>>> Commit 452639a64ad8 ("vdpa: make sure set_features is invoked
>>>>>> for legacy") made an exception for legacy guests to reset
>>>>>> features to 0, when config space is accessed before features
>>>>>> are set. We should relieve the verify_min_features() check
>>>>>> and allow features reset to 0 for this case.
>>>>>>
>>>>>> It's worth noting that not just legacy guests could access
>>>>>> config space before features are set. For instance, when
>>>>>> feature VIRTIO_NET_F_MTU is advertised some modern driver
>>>>>> will try to access and validate the MTU present in the config
>>>>>> space before virtio features are set.
>>>>> This looks like a spec violation:
>>>>>
>>>>> "
>>>>>
>>>>> The following driver-read-only field, mtu only exists if
>>>>> VIRTIO_NET_F_MTU is set. This field specifies the maximum MTU for the
>>>>> driver to use.
>>>>> "
>>>>>
>>>>> Do we really want to workaround this?
>>>> Isn't the commit 452639a64ad8 itself is a workaround for legacy guest?
>>>>
>>>> I think the point is, since there's legacy guest we'd have to support, this
>>>> host side workaround is unavoidable. Although I agree the violating driver
>>>> should be fixed (yes, it's in today's upstream kernel which exists for a
>>>> while now).
>>> Oh you are right:
>>>
>>>
>>> static int virtnet_validate(struct virtio_device *vdev)
>>> {
>>> if (!vdev->config->get) {
>>> dev_err(&vdev->dev, "%s failure: config access disabled\n",
>>> __func__);
>>> return -EINVAL;
>>> }
>>>
>>> if (!virtnet_validate_features(vdev))
>>> return -EINVAL;
>>>
>>> if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
>>> int mtu = virtio_cread16(vdev,
>>> offsetof(struct virtio_net_config,
>>> mtu));
>>> if (mtu < MIN_MTU)
>>> __virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
>>
>> I wonder why not simply fail here?
> Back in 2016 it went like this:
>
> On Thu, Jun 02, 2016 at 05:10:59PM -0400, Aaron Conole wrote:
> > + if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
> > + dev->mtu = virtio_cread16(vdev,
> > + offsetof(struct virtio_net_config,
> > + mtu));
> > + }
> > +
> > if (vi->any_header_sg)
> > dev->needed_headroom = vi->hdr_len;
> >
>
> One comment though: I think we should validate the mtu.
> If it's invalid, clear VIRTIO_NET_F_MTU and ignore.
>
>
> Too late at this point :)
>
> I guess it's a way to tell device "I can not live with this MTU",
> device can fail FEATURES_OK if it wants to. MIN_MTU
> is an internal linux thing and at the time I felt it's better to
> try to make progress.


What if e.g the device advertise a large MTU. E.g 64K here? In that
case, the driver can not live either. Clearing MTU won't help here.

Thanks


>
>
>>> }
>>>
>>> return 0;
>>> }
>>>
>>> And the spec says:
>>>
>>>
>>> The driver MUST follow this sequence to initialize a device:
>>> 1. Reset the device.
>>> 2. Set the ACKNOWLEDGE status bit: the guest OS has noticed the device.
>>> 3. Set the DRIVER status bit: the guest OS knows how to drive the device.
>>> 4. Read device feature bits, and write the subset of feature bits understood by the OS and driver to the
>>> device. During this step the driver MAY read (but MUST NOT write) the device-specific configuration
>>> fields to check that it can support the device before accepting it.
>>> 5. Set the FEATURES_OK status bit. The driver MUST NOT accept new feature bits after this step.
>>> 6. Re-read device status to ensure the FEATURES_OK bit is still set: otherwise, the device does not
>>> support our subset of features and the device is unusable.
>>> 7. Perform device-specific setup, including discovery of virtqueues for the device, optional per-bus setup,
>>> reading and possibly writing the device’s virtio configuration space, and population of virtqueues.
>>> 8. Set the DRIVER_OK status bit. At this point the device is “live”.
>>>
>>>
>>> Item 4 on the list explicitly allows reading config space before
>>> FEATURES_OK.
>>>
>>> I conclude that VIRTIO_NET_F_MTU is set means "set in device features".
>>
>> So this probably need some clarification. "is set" is used many times in the
>> spec that has different implications.
>>
>> Thanks
>>
>>
>>> Generally it is worth going over feature dependent config fields
>>> and checking whether they should be present when device feature is set
>>> or when feature bit has been negotiated, and making this clear.
>>>

\
 
 \ /
  Last update: 2021-02-23 11:20    [W:0.078 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site