lkml.org 
[lkml]   [2021]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: RE: [PATCH v22 4/4] scsi: ufs: Add HPB 2.0 support
From
Date
> > @@ -7447,8 +7452,14 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
> >
> > if (dev_info->wspecversion >= UFS_DEV_HPB_SUPPORT_VERSION &&
> > (b_ufs_feature_sup & UFS_DEV_HPB_SUPPORT)) {
> > - dev_info->hpb_enabled = true;
> > - ufshpb_get_dev_info(hba, desc_buf);
> > + bool hpb_en = false;
> > +
> > + err = ufshcd_query_flag_retry(hba,
> > UPIU_QUERY_OPCODE_READ_FLAG,
> > + QUERY_FLAG_IDN_HPB_EN, 0, &hpb_en);
> > + if (!err && hpb_en) {
> > + dev_info->hpb_enabled = true;
> > + ufshpb_get_dev_info(hba, desc_buf);
> QUERY_FLAG_IDN_HPB_EN only apply to HPB2.0

OK,

> > + }
> > }
> >
> > +
> > +/*
> > + * WRITE_BUFFER CMD support 36K (len=9) ~ 512K (len=128) default.
> > + * it is possible to change range of transfer_len through sysfs.
> > + */
> Actually the transfer length is limited by its (and read id) single byte.
> Fixing MAX_HPB_READ_ID = 128 is IMO a reasonable choice,
> But not limited by spec. Maybe make note of that ?
>
> > +static inline bool ufshpb_is_required_wb(struct ufshpb_lu *hpb, int len)
> > +{
> > + return (len >= hpb->pre_req_min_tr_len &&
> > + len <= hpb->pre_req_max_tr_len);
> > }
> Maybe also check HPB2.0 as well?

OK,

> > -void ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> > +int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> > {
> > struct ufshpb_lu *hpb;
> > struct ufshpb_region *rgn;
> > @@ -282,26 +546,27 @@ void ufshpb_prep(struct ufs_hba *hba, struct
> > ufshcd_lrb *lrbp)
> > u64 ppn;
> > unsigned long flags;
> > int transfer_len, rgn_idx, srgn_idx, srgn_offset;
> > + int read_id = MAX_HPB_READ_ID;
> Should be 0 if wb is not used?

I will fix it.

> > +
> > + hpb->pre_req = kcalloc(qd, sizeof(struct ufshpb_req), GFP_KERNEL);
> > + hpb->throttle_pre_req = qd;
> What is the point in throttling if you are allowing 32 simultaneous commands?
> There can't be more than qd/2 anyway?
> On the contrary, it makes much more sense to control the inflight map requests, instead?

OK, I will change it to qd/2.

> > + hpb->num_inflight_pre_req = 0;
> > +
>
> > -#define HPB_SUPPORT_VERSION 0x100
> > +#define HPB_SUPPORT_VERSION 0x200
> In ufshpb_get_dev_info you are bailing out if version != HPB_SUPPORT_VERSION
> Meaning you are no longer backward supporting HPB1.0?

I add to support legacy version of HPB.

Thanks,
Daejun

\
 
 \ /
  Last update: 2021-02-23 09:06    [W:0.156 / U:1.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site