lkml.org 
[lkml]   [2021]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: rawnand: qcom: Rename parameter name in macro
Date
This change will rename parameter name in macro
nandc_set_read_loc().renamed parameter names are
cw_offset, read_size, is_last_read_loc.
Sinc in QPIC V2 on-wards there is separate location
register to read last code word, so to just differnciate
b/w is_last_read_loc from last_cw this change needed.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 4189a7f..bfefb4e 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -181,11 +181,11 @@
#define ECC_BCH_4BIT BIT(2)
#define ECC_BCH_8BIT BIT(3)

-#define nandc_set_read_loc(nandc, reg, offset, size, is_last) \
+#define nandc_set_read_loc(nandc, reg, cw_offset, read_size, is_last_read_loc) \
nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \
- ((offset) << READ_LOCATION_OFFSET) | \
- ((size) << READ_LOCATION_SIZE) | \
- ((is_last) << READ_LOCATION_LAST))
+ ((cw_offset) << READ_LOCATION_OFFSET) | \
+ ((read_size) << READ_LOCATION_SIZE) | \
+ ((is_last_read_loc) << READ_LOCATION_LAST))

/*
* Returns the actual register address for all NAND_DEV_ registers
--
2.7.4
\
 
 \ /
  Last update: 2021-02-22 08:36    [W:0.032 / U:2.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site