lkml.org 
[lkml]   [2021]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 01/13] vfio: VFIO_IOMMU_SET_PASID_TABLE
From
Date
Hi Eric,

On 2021/2/22 18:53, Auger Eric wrote:
> Hi Keqian,
>
> On 2/2/21 1:34 PM, Keqian Zhu wrote:
>> Hi Eric,
>>
>> On 2020/11/16 19:00, Eric Auger wrote:
>>> From: "Liu, Yi L" <yi.l.liu@linux.intel.com>
>>>
>>> This patch adds an VFIO_IOMMU_SET_PASID_TABLE ioctl
>>> which aims to pass the virtual iommu guest configuration
>>> to the host. This latter takes the form of the so-called
>>> PASID table.
>>>
>>> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>>> Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
>>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>>>
>>> ---
>>> v11 -> v12:
>>> - use iommu_uapi_set_pasid_table
>>> - check SET and UNSET are not set simultaneously (Zenghui)
>>>
>>> v8 -> v9:
>>> - Merge VFIO_IOMMU_ATTACH/DETACH_PASID_TABLE into a single
>>> VFIO_IOMMU_SET_PASID_TABLE ioctl.
>>>
>>> v6 -> v7:
>>> - add a comment related to VFIO_IOMMU_DETACH_PASID_TABLE
>>>
>>> v3 -> v4:
>>> - restore ATTACH/DETACH
>>> - add unwind on failure
>>>
>>> v2 -> v3:
>>> - s/BIND_PASID_TABLE/SET_PASID_TABLE
>>>
>>> v1 -> v2:
>>> - s/BIND_GUEST_STAGE/BIND_PASID_TABLE
>>> - remove the struct device arg
>>> ---
>>> drivers/vfio/vfio_iommu_type1.c | 65 +++++++++++++++++++++++++++++++++
>>> include/uapi/linux/vfio.h | 19 ++++++++++
>>> 2 files changed, 84 insertions(+)
>>>
>>> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
>>> index 67e827638995..87ddd9e882dc 100644
>>> --- a/drivers/vfio/vfio_iommu_type1.c
>>> +++ b/drivers/vfio/vfio_iommu_type1.c
>>> @@ -2587,6 +2587,41 @@ static int vfio_iommu_iova_build_caps(struct vfio_iommu *iommu,
>>> return ret;
>>> }
>>>
>>> +static void
>>> +vfio_detach_pasid_table(struct vfio_iommu *iommu)
>>> +{
>>> + struct vfio_domain *d;
>>> +
>>> + mutex_lock(&iommu->lock);
>>> + list_for_each_entry(d, &iommu->domain_list, next)
>>> + iommu_detach_pasid_table(d->domain);
>>> +
>>> + mutex_unlock(&iommu->lock);
>>> +}
>>> +
>>> +static int
>>> +vfio_attach_pasid_table(struct vfio_iommu *iommu, unsigned long arg)
>>> +{
>>> + struct vfio_domain *d;
>>> + int ret = 0;
>>> +
>>> + mutex_lock(&iommu->lock);
>>> +
>>> + list_for_each_entry(d, &iommu->domain_list, next) {
>>> + ret = iommu_uapi_attach_pasid_table(d->domain, (void __user *)arg);
>> This design is not very clear to me. This assumes all iommu_domains share the same pasid table.
>>
>> As I understand, it's reasonable when there is only one group in the domain, and only one domain in the vfio_iommu.
>> If more than one group in the vfio_iommu, the guest may put them into different guest iommu_domain, then they have different pasid table.
>>
>> Is this the use scenario?
>
> the vfio_iommu is attached to a container. all the groups within a
> container share the same set of page tables (linux
> Documentation/driver-api/vfio.rst). So to me if you want to use
> different pasid tables, the groups need to be attached to different
> containers. Does that make sense to you?
OK, so this is what I understand about the design. A little question is that when
we perform attach_pasid_table on a container, maybe we ought to do a sanity
check to make sure that only one group is in this container, instead of
iterating all domain?

To be frank, my main concern is that if we put each group into different container
under nested mode, then we give up the possibility that they can share stage2 page tables,
which saves host memory and reduces the time of preparing environment for VM.

To me, I'd like to understand the "container shares page table" to be:
1) share stage2 page table under nested mode.
2) share stage1 page table under non-nested mode.

As when we perform "map" on a container:
1) under nested mode, we setup stage2 mapping.
2) under non-nested mode, we setup stage1 mapping.

Indeed, to realize stage2 mapping sharing, we should do much more work to refactor
SMMU_DOMAIN...

Hope you can consider this. :)

Thanks,
Keqian

>
> Thanks
>
> Eric
>>
>> Thanks,
>> Keqian
>>
>>> + if (ret)
>>> + goto unwind;
>>> + }
>>> + goto unlock;
>>> +unwind:
>>> + list_for_each_entry_continue_reverse(d, &iommu->domain_list, next) {
>>> + iommu_detach_pasid_table(d->domain);
>>> + }
>>> +unlock:
>>> + mutex_unlock(&iommu->lock);
>>> + return ret;
>>> +}
>>> +
>>> static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
>>> struct vfio_info_cap *caps)
>>> {
>>> @@ -2747,6 +2782,34 @@ static int vfio_iommu_type1_unmap_dma(struct vfio_iommu *iommu,
>>> -EFAULT : 0;
>>> }
>>>
>>> +static int vfio_iommu_type1_set_pasid_table(struct vfio_iommu *iommu,
>>> + unsigned long arg)
>>> +{
>>> + struct vfio_iommu_type1_set_pasid_table spt;
>>> + unsigned long minsz;
>>> + int ret = -EINVAL;
>>> +
>>> + minsz = offsetofend(struct vfio_iommu_type1_set_pasid_table, flags);
>>> +
>>> + if (copy_from_user(&spt, (void __user *)arg, minsz))
>>> + return -EFAULT;
>>> +
>>> + if (spt.argsz < minsz)
>>> + return -EINVAL;
>>> +
>>> + if (spt.flags & VFIO_PASID_TABLE_FLAG_SET &&
>>> + spt.flags & VFIO_PASID_TABLE_FLAG_UNSET)
>>> + return -EINVAL;
>>> +
>>> + if (spt.flags & VFIO_PASID_TABLE_FLAG_SET)
>>> + ret = vfio_attach_pasid_table(iommu, arg + minsz);
>>> + else if (spt.flags & VFIO_PASID_TABLE_FLAG_UNSET) {
>>> + vfio_detach_pasid_table(iommu);
>>> + ret = 0;
>>> + }
>>> + return ret;
>>> +}
>>> +
>>> static int vfio_iommu_type1_dirty_pages(struct vfio_iommu *iommu,
>>> unsigned long arg)
>>> {
>>> @@ -2867,6 +2930,8 @@ static long vfio_iommu_type1_ioctl(void *iommu_data,
>>> return vfio_iommu_type1_unmap_dma(iommu, arg);
>>> case VFIO_IOMMU_DIRTY_PAGES:
>>> return vfio_iommu_type1_dirty_pages(iommu, arg);
>>> + case VFIO_IOMMU_SET_PASID_TABLE:
>>> + return vfio_iommu_type1_set_pasid_table(iommu, arg);
>>> default:
>>> return -ENOTTY;
>>> }
>>> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>>> index 2f313a238a8f..78ce3ce6c331 100644
>>> --- a/include/uapi/linux/vfio.h
>>> +++ b/include/uapi/linux/vfio.h
>>> @@ -14,6 +14,7 @@
>>>
>>> #include <linux/types.h>
>>> #include <linux/ioctl.h>
>>> +#include <linux/iommu.h>
>>>
>>> #define VFIO_API_VERSION 0
>>>
>>> @@ -1180,6 +1181,24 @@ struct vfio_iommu_type1_dirty_bitmap_get {
>>>
>>> #define VFIO_IOMMU_DIRTY_PAGES _IO(VFIO_TYPE, VFIO_BASE + 17)
>>>
>>> +/*
>>> + * VFIO_IOMMU_SET_PASID_TABLE - _IOWR(VFIO_TYPE, VFIO_BASE + 22,
>>> + * struct vfio_iommu_type1_set_pasid_table)
>>> + *
>>> + * The SET operation passes a PASID table to the host while the
>>> + * UNSET operation detaches the one currently programmed. Setting
>>> + * a table while another is already programmed replaces the old table.
>>> + */
>>> +struct vfio_iommu_type1_set_pasid_table {
>>> + __u32 argsz;
>>> + __u32 flags;
>>> +#define VFIO_PASID_TABLE_FLAG_SET (1 << 0)
>>> +#define VFIO_PASID_TABLE_FLAG_UNSET (1 << 1)
>>> + struct iommu_pasid_table_config config; /* used on SET */
>>> +};
>>> +
>>> +#define VFIO_IOMMU_SET_PASID_TABLE _IO(VFIO_TYPE, VFIO_BASE + 22)
>>> +
>>> /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
>>>
>>> /*
>>>
>>
>
> .
>

\
 
 \ /
  Last update: 2021-02-22 13:56    [W:0.094 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site