lkml.org 
[lkml]   [2021]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 21/50] net: stmmac: set TxQ mode back to DCB after disabling CBS
Date
From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>

[ Upstream commit f317e2ea8c88737aa36228167b2292baef3f0430 ]

When disable CBS, mode_to_use parameter is not updated even the operation
mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
when tc_setup_cbs() function is called to re-enable CBS, the operation
mode of Tx Queue remains at DCB, which causing CBS fails to work.

This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
callback function.

Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 37c0bc699cd9c..cc1895a32b9d3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -314,7 +314,12 @@ static int tc_setup_cbs(struct stmmac_priv *priv,

priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
} else if (!qopt->enable) {
- return stmmac_dma_qmode(priv, priv->ioaddr, queue, MTL_QUEUE_DCB);
+ ret = stmmac_dma_qmode(priv, priv->ioaddr, queue,
+ MTL_QUEUE_DCB);
+ if (ret)
+ return ret;
+
+ priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
}

/* Port Transmit Rate and Speed Divider */
--
2.27.0


\
 
 \ /
  Last update: 2021-02-22 13:41    [W:0.174 / U:2.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site