Messages in this thread Patch in this message | | | From | Md Sadre Alam <> | Subject | [PATCH] mtd: rawnand: qcom: Add helper to check last code word | Date | Mon, 22 Feb 2021 11:54:55 +0530 |
| |
This change will add helper qcom_nandc_is_last_cw() which will check for last code word and return true for last code word and false for other code word.
Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org> --- drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index ae8870ec..4189a7f 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -661,6 +661,12 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset, *reg = cpu_to_le32(val); } +/* Helper to check the code word, whether it is last cw or not */ +static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw) +{ + return cw == (ecc->steps - 1); +} + /* helper to configure address register values */ static void set_address(struct qcom_nand_host *host, u16 column, int page) { @@ -1632,7 +1638,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); oob_size1 = host->bbm_size; - if (cw == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, cw)) { data_size2 = ecc->size - data_size1 - ((ecc->steps - 1) * 4); oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw + @@ -1713,7 +1719,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf, } for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) { - if (cw == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, cw)) { data_size = ecc->size - ((ecc->steps - 1) * 4); oob_size = (ecc->steps * 4) + host->ecc_bytes_hw; } else { @@ -1773,7 +1779,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf, u32 flash, buffer, erased_cw; int data_len, oob_len; - if (i == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, i)) { data_len = ecc->size - ((ecc->steps - 1) << 2); oob_len = ecc->steps << 2; } else { @@ -1872,7 +1878,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; - if (i == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, i)) { data_size = ecc->size - ((ecc->steps - 1) << 2); oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + host->spare_bytes; @@ -2051,7 +2057,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf, for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; - if (i == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, i)) { data_size = ecc->size - ((ecc->steps - 1) << 2); oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + host->spare_bytes; @@ -2068,10 +2074,10 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf, * when ECC is enabled, we don't really need to write anything * to oob for the first n - 1 codewords since these oob regions * just contain ECC bytes that's written by the controller - * itself. For the last codeword, we skip the bbm positions and - * write to the free oob area. + * itself. For the last codeword, we skip the bbm positions and write + * to the free oob area. */ - if (i == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, i)) { oob_buf += host->bbm_size; write_data_dma(nandc, FLASH_BUF_ACC + data_size, @@ -2126,7 +2132,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip, data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); oob_size1 = host->bbm_size; - if (i == (ecc->steps - 1)) { + if (qcom_nandc_is_last_cw(ecc, i)) { data_size2 = ecc->size - data_size1 - ((ecc->steps - 1) << 2); oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw + -- 2.7.4
| |