lkml.org 
[lkml]   [2021]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] arm64: dts: qcom: sc7180: Delete charger thermal zone and ADC channel for lazor <= rev3
From
Date
Quoting Matthias Kaehlcke (2021-02-22 12:38:46)
> On Mon, Feb 22, 2021 at 12:20:04PM -0800, Stephen Boyd wrote:
> > Quoting Matthias Kaehlcke (2021-02-19 18:10:59)
> > > Lazor rev3 and older are stuffed with a 47k NTC as thermistor for
> > > the charger temperature which currently isn't supported by the
> > > PM6150 ADC driver. Delete the charger thermal zone and ADC channel
> > > to avoid the use of bogus temperature values.
> > >
> > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > > ---
> > >
> > > arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 9 +++++++++
> > > arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 9 +++++++++
> > > arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 9 +++++++++
> > > 3 files changed, 27 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
> > > index 30e3e769d2b4..0974dbd424e1 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
> > > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
> > > @@ -14,6 +14,15 @@ / {
> > > compatible = "google,lazor-rev0", "qcom,sc7180";
> > > };
> > >
> > > +/*
> > > + * rev <= 3 are stuffed with a 47k NTC as charger thermistor which is currently
> > > + * not supported by the PM6150 ADC driver. Delete the thermal zone and ADC
> > > + * channel to avoid the use of bogus temperature values.
> > > + */
> > > +/delete-node/ &charger_thermal;
> > > +/delete-node/ &pm6150_adc_charger_thm;
> > > +/delete-node/ &pm6150_adc_tm_charger_thm;
> >
> > Can we disable pm6150_adc_tm instead on <= rev3 boards? It would be the
> > same number of lines, but is simpler to reason about disabled nodes vs.
> > deleted nodes usually.
>
> For Lazor theoretically this could be done since it doesn't use other ADC
> channels, however it won't work for other trogdor devices that will be
> upstreamed eventually. Some of these boards have the same problem, however
> they have other thermistors connected to the ADC. One could argue that it's
> preferable to do things in a uniform way, but I'm open to do it either way
> for Lazor.
>

I see. Can the thermal-zone be disabled then vs. deleting three nodes? I
think the thermal driver uses for_each_available_child_of_node() so that
would work?

\
 
 \ /
  Last update: 2021-02-22 21:47    [W:0.051 / U:1.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site