lkml.org 
[lkml]   [2021]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] arm64: dts: fsl: add support for Kontron pitx-imx8m board
On Mon, Feb 22, 2021 at 03:07:56PM +0100, Heiko Thiery wrote:
> The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
>
> Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
> ---
> v2:
> - bring root nodes in alphabetical order
> - remove pinctrl_gpio_keys for pciewake
> - remove pinctrl_sai2 and pinctrl_spdfif1 since it is not used yet
>
> Thanks to Michael Walle:
> - add pinctrl for regulator-v-3v3-sd
> - add name for regulator swbst
> - add comment about currently unused audio codec
> - put usb_phy entry in correct alphabetical order
>
> Thanks to Krzysztof Kozlowski:
> - use generic names for pcie-refclk, tpm, fan-controller, sensor
> - remove empty line
> - fix group name to match schema (ecspi2cs -> ecspi2csgrp)
>
>
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../freescale/imx8mq-kontron-pitx-imx8m.dts | 641 ++++++++++++++++++
> 2 files changed, 642 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
>

Looks fine to me, also with the changes pointed out by Micahel in other
email in this thread:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2021-02-22 19:47    [W:0.052 / U:2.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site