lkml.org 
[lkml]   [2021]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/13] Add support for Hikey 970 PCIe
Date
This series add support for Kirin 970 and for the Hikey 970
board at the already-existing driver.

patches 1-3 were previously submitted as RFC:

- Patch 1 converts the Synopsys Designware PCIe binding
documentation to the DT schema;
- Patch 2 converts the pcie-kirin DT binding to the DT schema;
- Patch 3 adds some extra configuration needed by
Kirin 970.

Patches 4-5 were imported from Manivannan's Hikey 970
tree:

https://git.linaro.org/people/manivannan.sadhasivam/96b-common.git/commit/?h=hikey970_pcie&id=4917380ad023c62960aa0f876bd4f23cefc8729e

It contains the original port made by Linaro.

patches 6 to 12 contains several cleanups applied on the
top of Manivann's work, in order to simplify the extra data
that would be required at DT, and to ensure that the power
regulator needed to enable the PCI support on Hikey970
will be enabled before trying to power it on, as otherwise,
PCI resource allocation will fail.

-

patch 13 is here mostly as an example about what is needed
in order for PCIe (and Ethernet) to start working on Hikey 970.

It won't apply cleanly, as it depends on another patch series,
adding the needed regulator drivers.

I'll re-submit patch 13 after the pending stuff gets merged
upstream.

Manivannan Sadhasivam (2):
pci: dwc: pcie-kirin: add HI3670 PCI-E controller support
arm64: dts: hisilicon: Add HI3670 PCI-E controller support

Mauro Carvalho Chehab (11):
doc: bindings: pci: designware-pcie.txt: convert it to yaml
doc: bindings: kirin-pcie.txt: convert it to yaml
doc: bindings: add new parameters used by Hikey 970
pci: dwc: pcie-kirin: simplify error handling logic
pci: dwc: pcie-kirin: simplify kirin 970 get resource logic
pci: dwc: pcie-kirin: place common init code altogether
pci: dwc: pcie-kirin: allow to optionally require a regulator
pci: dwc: pcie-kirin: allow using multiple reset GPIOs
pci: dwc: pcie-kirin: add support for clkreq GPIOs
pci: dwc: pcie-kirin: cleanup kirin970_pcie_get_eyeparam()
arm64: dts: hisilicon: cleanup Hikey 970 PCI schema

.../bindings/pci/amlogic,meson-pcie.txt | 4 +-
.../bindings/pci/axis,artpec6-pcie.txt | 2 +-
.../bindings/pci/designware-pcie.txt | 77 --
.../bindings/pci/fsl,imx6q-pcie.txt | 2 +-
.../bindings/pci/hisilicon,kirin-pcie.yaml | 144 ++++
.../bindings/pci/hisilicon-histb-pcie.txt | 2 +-
.../bindings/pci/hisilicon-pcie.txt | 2 +-
.../devicetree/bindings/pci/kirin-pcie.txt | 50 --
.../bindings/pci/layerscape-pci.txt | 2 +-
.../bindings/pci/nvidia,tegra194-pcie.txt | 4 +-
.../devicetree/bindings/pci/pci-armada8k.txt | 2 +-
.../devicetree/bindings/pci/pci-keystone.txt | 10 +-
.../devicetree/bindings/pci/pcie-al.txt | 2 +-
.../devicetree/bindings/pci/qcom,pcie.txt | 14 +-
.../bindings/pci/samsung,exynos-pcie.yaml | 2 +-
.../devicetree/bindings/pci/snps,pcie.yaml | 139 ++++
.../pci/socionext,uniphier-pcie-ep.yaml | 2 +-
.../devicetree/bindings/pci/ti-pci.txt | 4 +-
.../devicetree/bindings/pci/uniphier-pcie.txt | 2 +-
MAINTAINERS | 4 +-
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 64 ++
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 1 -
drivers/pci/controller/dwc/pcie-kirin.c | 736 +++++++++++++++++-
23 files changed, 1084 insertions(+), 187 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt
create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
create mode 100644 Documentation/devicetree/bindings/pci/snps,pcie.yaml

--
2.29.2


\
 
 \ /
  Last update: 2021-02-02 14:40    [W:0.888 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site