lkml.org 
[lkml]   [2021]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 0/3] Make fw_devlink=on more forgiving
On Tue, Feb 2, 2021 at 9:41 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Tue, Feb 2, 2021 at 10:52 AM <Tudor.Ambarus@microchip.com> wrote:
> >
> > Hi, Saravana,
> >
> > On 2/2/21 6:33 AM, Saravana Kannan wrote:
> > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > >
> > > This patch series solves two general issues with fw_devlink=on
> > >
> > > Patch 1/3 and 3/3 addresses the issue of firmware nodes that look like
> > > they'll have struct devices created for them, but will never actually
> > > have struct devices added for them. For example, DT nodes with a
> > > compatible property that don't have devices added for them.
> > >
> > > Patch 2/2 address (for static kernels) the issue of optional suppliers
> > > that'll never have a driver registered for them. So, if the device could
> > > have probed with fw_devlink=permissive with a static kernel, this patch
> > > should allow those devices to probe with a fw_devlink=on. This doesn't
> > > solve it for the case where modules are enabled because there's no way
> > > to tell if a driver will never be registered or it's just about to be
> > > registered. I have some other ideas for that, but it'll have to come
> > > later thinking about it a bit.
> > >
> > > Marek, Geert,
> > >
> > > I don't expect v2 to do any better for your cases.
> > >
> > > This series not making any difference for Marek is still a mystery to
> > > me. I guess one of the consumers doesn't take too well to its probe (and
> > > it's consumers' probe) being delayed till late_initcall(). I'll continue
> > > looking into it.
> > >
> > > Marc,
> > >
> > > This v2 should do better than v1 with gpiolib stub driver reverted. I
> > > forgot to take care of the case where more suppliers could link after I
> > > went and deleted some of the links. v2 handles that now.
> > >
> > > Tudor,
> > >
> > > You should still make the clock driver fix (because it's a bug), but I
> > > think this series will fix your issue too (even without the clock driver
> > > fix). Can you please give this a shot?
> > >
> >
> > Did the following tests (using sama5_defconfig and at91-sama5d2_xplained.dts):
> > 1/ modular kernel with your v2 on top of next-20210202, and without the clock
> > driver fix: the problem persists.
> >
> > 2/ static kernel with your v2 on top of next-20210202, and without the clock
> > driver fix: the problem persists. Comparing to the previous test, I see that
> > the links to pmc are dropped. I can see the following only with early printk
> > enabled:
> > platform fc008000.serial: Dropping the link to f0014000.pmc
> > But later on, the serial still gets deferred waiting for the dma controller
> > this time:
> > platform f8020000.serial: probe deferral - supplier f0010000.dma-controller not ready
> > I'll check what happens in the dma-controller.
>
> Not sure if it's the case here, but some serial drivers use DMA only
> when available and decide that on open() rather than probe. How is
> devlinks going to deal with that?

That's kinda what I'm trying to work out here :) but in a more generic fashion.

-Saravana

\
 
 \ /
  Last update: 2021-02-02 19:32    [W:0.085 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site