lkml.org 
[lkml]   [2021]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] platform/x86: dell-wmi-sysman: correct an initialization failure
Date


> -----Original Message-----
> From: mark gross <mgross@linux.intel.com>
> Sent: Thursday, February 18, 2021 16:49
> To: Limonciello, Mario
> Cc: Hans De Goede; Mark Gross; LKML; platform-driver-x86@vger.kernel.org;
> Bharathi, Divya; Alexander Naumann
> Subject: Re: [PATCH] platform/x86: dell-wmi-sysman: correct an initialization
> failure
>
>
> [EXTERNAL EMAIL]
>
> On Thu, Feb 18, 2021 at 01:17:23PM -0600, Mario Limonciello wrote:
> > On Dell systems that don't support this interface the module is
> > mistakingly returning error code "0", when it should be returning
> > -ENODEV. Correct a logic error to guarantee the correct return code.
> >
> > Cc: Divya Bharathi <Divya_Bharathi@Dell.com>
> > Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
> > Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> > ---
> > drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c | 4 +++-
> > drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c | 4 +++-
> > drivers/platform/x86/dell-wmi-sysman/sysman.c | 4 ++--
> > 3 files changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> b/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> > index f95d8ddace5a..8d59f81f9db4 100644
> > --- a/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> > +++ b/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> > @@ -175,7 +175,9 @@ static struct wmi_driver bios_attr_set_interface_driver
> = {
> >
> > int init_bios_attr_set_interface(void)
> > {
> > - return wmi_driver_register(&bios_attr_set_interface_driver);
> > + int ret = wmi_driver_register(&bios_attr_set_interface_driver);
> I have to ask if the propper fix should be in wmi_driver_register

Do you mean something like this?

diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index c669676ea8e8..89d04c5e3ab9 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -1415,6 +1415,11 @@ static int acpi_wmi_probe(struct platform_device *device)
int __must_check __wmi_driver_register(struct wmi_driver *driver,
struct module *owner)
{
+ const struct wmi_device_id *id = driver->id_table;
+
+ if (!wmi_has_guid(id->guid_string))
+ return -ENODEV;
+
driver->driver.owner = owner;
driver->driver.bus = &wmi_bus_type;

> > +
> > + return wmi_priv.bios_attr_wdev ? ret : -ENODEV;
> Also, is there any point to call wmi_driver_register if returning -ENODEV?
> i.e. should the call to driver register be wrapped in a test for
> bios_atter_wdev?
With some bus types it probably makes sense to register the driver whether or
not the device is present. With the wmi bus it's fixed at bootup.

>
>
> > }
> >
> > void exit_bios_attr_set_interface(void)
> > diff --git a/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> b/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> > index 5780b4d94759..bf449dc5ff47 100644
> > --- a/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> > +++ b/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> > @@ -142,7 +142,9 @@ static struct wmi_driver bios_attr_pass_interface_driver
> = {
> >
> > int init_bios_attr_pass_interface(void)
> > {
> > - return wmi_driver_register(&bios_attr_pass_interface_driver);
> > + int ret = wmi_driver_register(&bios_attr_pass_interface_driver);
> > +
> > + return wmi_priv.password_attr_wdev ? ret : -ENODEV;
> same comments as above only for password_atter_wdev.
>
> --mark
>
> > }
> >
> > void exit_bios_attr_pass_interface(void)
> > diff --git a/drivers/platform/x86/dell-wmi-sysman/sysman.c
> b/drivers/platform/x86/dell-wmi-sysman/sysman.c
> > index cb81010ba1a2..d9ad0e83b66f 100644
> > --- a/drivers/platform/x86/dell-wmi-sysman/sysman.c
> > +++ b/drivers/platform/x86/dell-wmi-sysman/sysman.c
> > @@ -513,13 +513,13 @@ static int __init sysman_init(void)
> > }
> >
> > ret = init_bios_attr_set_interface();
> > - if (ret || !wmi_priv.bios_attr_wdev) {
> > + if (ret) {
> > pr_debug("failed to initialize set interface\n");
> > goto fail_set_interface;
> > }
> >
> > ret = init_bios_attr_pass_interface();
> > - if (ret || !wmi_priv.password_attr_wdev) {
> > + if (ret) {
> > pr_debug("failed to initialize pass interface\n");
> > goto fail_pass_interface;
> > }
> > --
> > 2.25.1
> >

\
 
 \ /
  Last update: 2021-02-19 00:29    [W:0.240 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site