lkml.org 
[lkml]   [2021]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 ethernet controller
Hi Nobuhiro,


On Mon, 15 Feb 2021 at 21:00, Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@toshiba.co.jp> wrote:
>
> Add the ethernet controller node in Toshiba Visconti5 SoC-specific DT file.
> And enable this node in TMPV7708 RM main board's board-specific DT file.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
> .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 18 +++++++++++++
> arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 25 +++++++++++++++++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> index ed0bf7f13f54..48fa8776e36f 100644
> --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> @@ -41,3 +41,21 @@ &uart1 {
> clocks = <&uart_clk>;
> clock-names = "apb_pclk";
> };
> +
> +&piether {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + clocks = <&clk300mhz>, <&clk125mhz>;
> + clock-names = "stmmaceth", "phy_ref_clk";
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy@1 {
> + device_type = "ethernet-phy";
> + reg = <0x1>;

This build error was noticed on LKFT builder while building arm64 dtb
on linux next 20210216 tag.

arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error
FATAL ERROR: Unable to parse input tree

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382

--
Linaro LKFT
https://lkft.linaro.org

\
 
 \ /
  Last update: 2021-02-17 11:37    [W:0.721 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site