lkml.org 
[lkml]   [2021]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v14 2/4] phy: Add media type and speed serdes configuration interfaces
From
Date
Hi,

On 16/02/21 2:07 pm, Steen Hegelund wrote:
> Hi Andrew and Kishon,
>
> On Mon, 2021-02-15 at 15:07 +0100, Andrew Lunn wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you
>> know the content is safe
>>
>> On Mon, Feb 15, 2021 at 05:25:10PM +0530, Kishon Vijay Abraham I
>> wrote:
>>> Okay. Is it going to be some sort of manual negotiation where the
>>> Ethernet controller invokes set_speed with different speeds? Or the
>>> Ethernet controller will get the speed using some out of band
>>> mechanism
>>> and invokes set_speed once with the actual speed?
>>
>> Hi Kishon
>>
>> There are a few different mechanism possible.
>>
>> The SFP has an EEPROM which contains lots of parameters. One is the
>> maximum baud rate the module supports. PHYLINK will combine this
>> information with the MAC capabilities to determine the default speed.
>>
>> The users can select the mode the MAC works in, e.g. 1000BaseX vs
>> 2500BaseX, via ethtool -s. Different modes needs different speeds.
>>
>> Some copper PHYs will change there host side interface baud rate when
>> the media side interface changes mode. 10GBASE-X for 10G copper,
>> 5GBase-X for 5G COPPER, 2500Base-X for 2.5G copper, and SGMII for
>> old school 10/100/1G Ethernet.
>>
>> Mainline Linux has no support for it, but some 'vendor crap' will do
>> a
>> manual negotiation, simply trying different speeds and see if the
>> SERDES establishes link. There is nothing standardised for this, as
>> far as i know.
>>
>>     Andrew
>
> Yes, in case I mention the only way to ensure communication is human
> intervention to set the speed to the highest common denominator.

Okay.. is it the same case for set_media as well?

Thanks
Kishon

\
 
 \ /
  Last update: 2021-02-17 11:36    [W:0.053 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site