lkml.org 
[lkml]   [2021]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for SN65DSI83/84/85
Date
SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge
controller IC's from Texas Instruments.

SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge

Right now the bridge driver is supporting Channel A with single
link, so dt-bindings documented according to it.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- fixed Rob comments
- updated commit message and file name to support all chip variants
Changes for v2:
- none

.../bindings/display/bridge/ti,sn65dsi8x.yaml | 122 ++++++++++++++++++
1 file changed, 122 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi8x.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi8x.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi8x.yaml
new file mode 100644
index 000000000000..7f9f8cd6e786
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi8x.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi8x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SN65DSI83/84/85 MIPI DSI to LVDS bridge bindings
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+ SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge controller
+ IC's from Texas Instruments.
+
+ SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
+ SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
+ SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge
+
+ Bridge decodes MIPI DSI 18bpp RGB666 and 240bpp RG888 packets and
+ converts the formatted video data stream to a FlatLink compatible
+ LVDS output operating at pixel clocks operating from 25 MHx to
+ 154 MHz.
+
+properties:
+ compatible:
+ enum:
+ - ti,sn65dsi83
+ - ti,sn65dsi84
+
+ reg:
+ const: 0x2c
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO specifier for bridge enable pin (active high).
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ DSI Input. The remote endpoint phandle should be a
+ reference to a valid mipi_dsi_host device node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for LVDS output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ data-lanes = <0 1>;
+ };
+ };
+ };
+ };
+
+ i2c6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2c {
+ compatible = "ti,sn65dsi84";
+ reg = <0x2c>;
+ enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
+ };
--
2.25.1
\
 
 \ /
  Last update: 2021-02-14 18:47    [W:0.156 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site