lkml.org 
[lkml]   [2021]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v14 2/4] phy: Add media type and speed serdes configuration interfaces
From
Date
Hi Kishon,

On Fri, 2021-02-12 at 17:02 +0530, Kishon Vijay Abraham I wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> Hi Steen,
>
> On 10/02/21 2:22 pm, Steen Hegelund wrote:
> > Provide new phy configuration interfaces for media type and speed
> > that
> > allows allows e.g. PHYs used for ethernet to be configured with
> > this
> > information.
> >
> > Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> > Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
> > Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> > Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> > ---
> >  drivers/phy/phy-core.c  | 30 ++++++++++++++++++++++++++++++
> >  include/linux/phy/phy.h | 26 ++++++++++++++++++++++++++
> >  2 files changed, 56 insertions(+)
> >
> > diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> > index 71cb10826326..ccb575b13777 100644
> > --- a/drivers/phy/phy-core.c
> > +++ b/drivers/phy/phy-core.c
> > @@ -373,6 +373,36 @@ int phy_set_mode_ext(struct phy *phy, enum
> > phy_mode mode, int submode)
> >  }
> >  EXPORT_SYMBOL_GPL(phy_set_mode_ext);
> >
> > +int phy_set_media(struct phy *phy, enum phy_media media)
> > +{
> > +     int ret;
> > +
> > +     if (!phy || !phy->ops->set_media)
> > +             return 0;
> > +
> > +     mutex_lock(&phy->mutex);
> > +     ret = phy->ops->set_media(phy, media);
> > +     mutex_unlock(&phy->mutex);
> > +
> > +     return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(phy_set_media);
> > +
> > +int phy_set_speed(struct phy *phy, int speed)
> > +{
> > +     int ret;
> > +
> > +     if (!phy || !phy->ops->set_speed)
> > +             return 0;
> > +
> > +     mutex_lock(&phy->mutex);
> > +     ret = phy->ops->set_speed(phy, speed);
> > +     mutex_unlock(&phy->mutex);
> > +
> > +     return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(phy_set_speed);
>
> Can't speed derived from mode? Do we need a separate set_speed
> function?
>
> Thanks
> Kishon

Yes the client will need to be able to choose the speed as needed: 
e.g. lower than the serdes mode supports, in case the the media or the
other end is not capable of running that speed.  

An example is a 10G and 25G serdes connected via DAC and as there is no
inband autoneg, the 25G client would have to manually select 10G speed
to communicate with its partner.

>
> > +
> >  int phy_reset(struct phy *phy)
> >  {
> >       int ret;
> > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> > index e435bdb0bab3..e4fd69a1faa7 100644
> > --- a/include/linux/phy/phy.h
> > +++ b/include/linux/phy/phy.h
> > @@ -44,6 +44,12 @@ enum phy_mode {
> >       PHY_MODE_DP
> >  };
> >
> > +enum phy_media {
> > +     PHY_MEDIA_DEFAULT,
> > +     PHY_MEDIA_SR,
> > +     PHY_MEDIA_DAC,
> > +};
> > +
> >  /**
> >   * union phy_configure_opts - Opaque generic phy configuration
> >   *
> > @@ -64,6 +70,8 @@ union phy_configure_opts {
> >   * @power_on: powering on the phy
> >   * @power_off: powering off the phy
> >   * @set_mode: set the mode of the phy
> > + * @set_media: set the media type of the phy (optional)
> > + * @set_speed: set the speed of the phy (optional)
> >   * @reset: resetting the phy
> >   * @calibrate: calibrate the phy
> >   * @release: ops to be performed while the consumer relinquishes
> > the PHY
> > @@ -75,6 +83,8 @@ struct phy_ops {
> >       int     (*power_on)(struct phy *phy);
> >       int     (*power_off)(struct phy *phy);
> >       int     (*set_mode)(struct phy *phy, enum phy_mode mode, int
> > submode);
> > +     int     (*set_media)(struct phy *phy, enum phy_media media);
> > +     int     (*set_speed)(struct phy *phy, int speed);
> >
> >       /**
> >        * @configure:
> > @@ -215,6 +225,8 @@ int phy_power_off(struct phy *phy);
> >  int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int
> > submode);
> >  #define phy_set_mode(phy, mode) \
> >       phy_set_mode_ext(phy, mode, 0)
> > +int phy_set_media(struct phy *phy, enum phy_media media);
> > +int phy_set_speed(struct phy *phy, int speed);
> >  int phy_configure(struct phy *phy, union phy_configure_opts
> > *opts);
> >  int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
> >                union phy_configure_opts *opts);
> > @@ -344,6 +356,20 @@ static inline int phy_set_mode_ext(struct phy
> > *phy, enum phy_mode mode,
> >  #define phy_set_mode(phy, mode) \
> >       phy_set_mode_ext(phy, mode, 0)
> >
> > +static inline int phy_set_media(struct phy *phy, enum phy_media
> > media)
> > +{
> > +     if (!phy)
> > +             return 0;
> > +     return -ENOSYS;
> > +}
> > +
> > +static inline int phy_set_speed(struct phy *phy, int speed)
> > +{
> > +     if (!phy)
> > +             return 0;
> > +     return -ENOSYS;
> > +}
> > +
> >  static inline enum phy_mode phy_get_mode(struct phy *phy)
> >  {
> >       return PHY_MODE_INVALID;
> >


Thanks for your comments.


--
BR
Steen

-=-=-=-=-=-=-=-=-=-=-=-=-=-=
steen.hegelund@microchip.com

\
 
 \ /
  Last update: 2021-02-12 14:14    [W:0.388 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site