lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()
Date

Invoking x86_init.irqs.create_pci_msi_domain() before
x86_init.pci.arch_init() breaks XEN PV.

The XEN_PV specific pci.arch_init() function overrides the default
create_pci_msi_domain() which is obviously too late.

As a consequence the XEN PV PCI/MSI allocation goes through the native
path which runs out of vectors and causes malfunction.

Invoke it after x86_init.pci.arch_init().

Fixes: 6b15ffa07dc3 ("x86/irq: Initialize PCI/MSI domain at PCI init time")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
---
arch/x86/pci/init.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)

--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -9,16 +9,23 @@
in the right sequence from here. */
static __init int pci_arch_init(void)
{
- int type;
-
- x86_create_pci_msi_domain();
+ int type, pcbios = 1;

type = pci_direct_probe();

if (!(pci_probe & PCI_PROBE_NOEARLY))
pci_mmcfg_early_init();

- if (x86_init.pci.arch_init && !x86_init.pci.arch_init())
+ if (x86_init.pci.arch_init)
+ pcbios = x86_init.pci.arch_init();
+
+ /*
+ * Must happen after x86_init.pci.arch_init(). Xen sets up the
+ * x86_init.irqs.create_pci_msi_domain there.
+ */
+ x86_create_pci_msi_domain();
+
+ if (!pcbios)
return 0;

pci_pcbios_init();

\
 
 \ /
  Last update: 2021-02-10 16:31    [W:0.044 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site