Messages in this thread Patch in this message | | | From | Heiko Stuebner <> | Subject | [PATCH 4/6] arm64: dts: rockchip: add #phy-cells to mipi-dsi1 | Date | Wed, 10 Feb 2021 12:10:18 +0100 |
| |
From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
The dsi controller includes access to the dphy which might be used not only for dsi output but also for csi input on dsi1, so add the necessary #phy-cells to allow it to be used as phy.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index edbbf35fe19e..5d2178cb3e38 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1865,6 +1865,7 @@ mipi_dsi1: mipi@ff968000 { rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; + #phy-cells = <0>; status = "disabled"; ports { -- 2.29.2
| |