lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip: timers/core] dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified
The following commit has been merged into the timers/core branch of tip:

Commit-ID: e1922b5da0e6869f1850c4447bed0b9cb1cf5034
Gitweb: https://git.kernel.org/tip/e1922b5da0e6869f1850c4447bed0b9cb1cf5034
Author: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
AuthorDate: Fri, 08 Jan 2021 17:30:04 +01:00
Committer: Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Mon, 18 Jan 2021 16:33:51 +01:00

dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified

The NPCM750 Timer/Watchdog Controller has multiple interrupt lines,
connected to multiple timers. The driver uses timer 0 for timer
interrupts, so the interrupt line corresponding to timer 0 should be
specified in DT.

I removed the mention of "flags for falling edge", because the timer
controller uses high-level interrupts rather than falling-edge
interrupts, and whether flags should be specified is up the interrupt
controller's DT binding.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210108163004.492649-1-j.neuschaefer@gmx.net
---
Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
index ea22dfe..97258f1 100644
--- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
@@ -6,8 +6,7 @@ timer counters.
Required properties:
- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750.
- reg : Offset and length of the register set for the device.
-- interrupts : Contain the timer interrupt with flags for
- falling edge.
+- interrupts : Contain the timer interrupt of timer 0.
- clocks : phandle of timer reference clock (usually a 25 MHz clock).

Example:
\
 
 \ /
  Last update: 2021-02-10 11:22    [W:1.338 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site