lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 net-next 04/11] net: dsa: configure proper brport flags when ports leave the bridge
From
Date


On 2/10/2021 1:14 AM, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> For a DSA switch port operating in standalone mode, address learning
> doesn't make much sense since that is a bridge function. In fact,
> address learning even breaks setups such as this one:
>
> +---------------------------------------------+
> | |
> | +-------------------+ |
> | | br0 | send receive |
> | +--------+-+--------+ +--------+ +--------+ |
> | | | | | | | | | |
> | | swp0 | | swp1 | | swp2 | | swp3 | |
> | | | | | | | | | |
> +-+--------+-+--------+-+--------+-+--------+-+
> | ^ | ^
> | | | |
> | +-----------+ |
> | |
> +--------------------------------+
>
> because if the switch has a single FDB (can offload a single bridge)
> then source address learning on swp3 can "steal" the source MAC address
> of swp2 from br0's FDB, because learning frames coming from swp2 will be
> done twice: first on the swp1 ingress port, second on the swp3 ingress
> port. So the hardware FDB will become out of sync with the software
> bridge, and when swp2 tries to send one more packet towards swp1, the
> ASIC will attempt to short-circuit the forwarding path and send it
> directly to swp3 (since that's the last port it learned that address on),
> which it obviously can't, because swp3 operates in standalone mode.
>
> So DSA drivers operating in standalone mode should still configure a
> list of bridge port flags even when they are standalone. Currently DSA
> attempts to call dsa_port_bridge_flags with 0, which disables egress
> flooding of unknown unicast and multicast, something which doesn't make
> much sense. For the switches that implement .port_egress_floods - b53
> and mv88e6xxx, it probably doesn't matter too much either, since they
> can possibly inject traffic from the CPU into a standalone port,
> regardless of MAC DA, even if egress flooding is turned off for that
> port, but certainly not all DSA switches can do that - sja1105, for
> example, can't. So it makes sense to use a better common default there,
> such as "flood everything".
>
> It should also be noted that what DSA calls "dsa_port_bridge_flags()"
> is a degenerate name for just calling .port_egress_floods(), since
> nothing else is implemented - not learning, in particular. But disabling
> address learning, something that this driver is also coding up for, will
> be supported by individual drivers once .port_egress_floods is replaced
> with a more generic .port_bridge_flags.
>
> Previous attempts to code up this logic have been in the common bridge
> layer, but as pointed out by Ido Schimmel, there are corner cases that
> are missed when doing that:
> https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/
>
> So, at least for now, let's leave DSA in charge of setting port flags
> before and after the bridge join and leave.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

\
 
 \ /
  Last update: 2021-02-11 05:19    [W:0.553 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site