lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V3 1/2] dt-bindings: clk: versaclock5: Add optional load capacitance property
From
Date
Quoting Adam Ford (2021-02-10 12:40:38)
> On Wed, Feb 10, 2021 at 2:18 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Sun, Feb 07, 2021 at 12:51:38PM -0600, Adam Ford wrote:
> > > There are two registers which can set the load capacitance for
> > > XTAL1 and XTAL2. These are optional registers when using an
> > > external crystal. Since XTAL1 and XTAL2 will set to the same value,
> > > update the binding to support a single property called
> > > xtal-load-femtofarads.
> > >
> > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > ---
> > > V3: No Change
> > > V2: No Change
> > >
> > > A couple people suggested that I not use the $ref, but without it,
> > > the bindings check failed with errors.
> > >
> > > diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> > > index 2ac1131fd922..c268debe5b8d 100644
> > > --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> > > +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> > > @@ -59,6 +59,12 @@ properties:
> > > minItems: 1
> > > maxItems: 2
> > >
> > > + idt,xtal-load-femtofarads:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> >
> > Don't need a type with standard unit suffix.
>
> If I remove that line, the binding check fails.
>

Is your dt-schema up to date?

\
 
 \ /
  Last update: 2021-02-11 03:36    [W:0.056 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site