lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] staging: rtl8723bs: fix function comments to follow kernel-doc
On Wed, Feb 10, 2021 at 02:42:30AM +0530, karthik alapati wrote:
> fix checkpatch.pl warning for "block comments should align the
> * on each line" and make function comments follow kernel-doc
>
> Signed-off-by: karthik alapati <mail@karthek.com>
> ---
> .../staging/rtl8723bs/hal/rtl8723b_phycfg.c | 209 ++++++++----------
> 1 file changed, 91 insertions(+), 118 deletions(-)
>
> diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
> index cf23414d7..b7fca881c 100644
> --- a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
> +++ b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
> @@ -20,16 +20,11 @@
> #define MAX_DOZE_WAITING_TIMES_9x 64
>
> /**
> -* Function: phy_CalculateBitShift
> -*
> -* OverView: Get shifted position of the BitMask
> -*
> -* Input:
> -* u32 BitMask,
> -*
> -* Output: none
> -* Return: u32 Return the shift bit bit position of the mask
> -*/
> + * phy_CalculateBitShift - Get shifted position of the BitMask.
> + * @BitMask: Bitmask.
> + *
> + * Return: Return the shift bit position of the mask
> + */
> static u32 phy_CalculateBitShift(u32 BitMask)
> {
> u32 i;
> @@ -43,19 +38,17 @@ static u32 phy_CalculateBitShift(u32 BitMask)
>
>
> /**
> -* Function: PHY_QueryBBReg
> -*
> -* OverView: Read "specific bits" from BB register
> -*
> -* Input:
> -* struct adapter * Adapter,
> -* u32 RegAddr, The target address to be readback
> -* u32 BitMask The target bit position in the target address
> -* to be readback
> -* Output: None
> -* Return: u32 Data The readback register value
> -* Note: This function is equal to "GetRegSetting" in PHY programming guide
> -*/
> + * PHY_QueryBBReg - Read "specific bits" from BB register.
> + * @Adapter:
> + * @RegAddr: The target address to be readback
> + * @BitMask: The target bit position in the target address
> + * to be readback
> + *
> + * Return: The readback register value
> + *
> + * .. Note:: This function is equal to "GetRegSetting" in PHY programming
> + * guide
> + */
> u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
> {
> u32 OriginalValue, BitShift;
> @@ -64,7 +57,10 @@ u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
> return 0;
> #endif
>
> - /* RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx)\n", RegAddr, BitMask)); */
> + /**
> + * RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryBBReg():
> + * RegAddr(%#lx), BitMask(%#lx)\n", RegAddr, BitMask));
> + */

Just delete this (in a separate patch).

>
> OriginalValue = rtw_read32(Adapter, RegAddr);
> BitShift = phy_CalculateBitShift(BitMask);
> @@ -75,22 +71,17 @@ u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
>
>
> /**
> -* Function: PHY_SetBBReg
> -*
> -* OverView: Write "Specific bits" to BB register (page 8~)
> -*
> -* Input:
> -* struct adapter * Adapter,
> -* u32 RegAddr, The target address to be modified
> -* u32 BitMask The target bit position in the target address
> -* to be modified
> -* u32 Data The new register value in the target bit position
> -* of the target address
> -*
> -* Output: None
> -* Return: None
> -* Note: This function is equal to "PutRegSetting" in PHY programming guide
> -*/
> + * PHY_SetBBReg - Write "Specific bits" to BB register (page 8~).
> + * @Adapter:
> + * @RegAddr: The target address to be modified
> + * @BitMask: The target bit position in the target address
> + * to be modified
> + * @Data: The new register value in the target bit position
> + * of the target address
> + *
> + * .. Note:: This function is equal to "PutRegSetting" in PHY programming
> + * guide
> + */
>
> void PHY_SetBBReg_8723B(
> struct adapter *Adapter,
> @@ -106,7 +97,10 @@ void PHY_SetBBReg_8723B(
> return;
> #endif
>
> - /* RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data)); */
> + /**
> + * RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetBBReg():
> + * RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data));
> + */

Delete.

>
> if (BitMask != bMaskDWord) { /* if not "double word" write */
> OriginalValue = rtw_read32(Adapter, RegAddr);
> @@ -184,27 +178,21 @@ static u32 phy_RFSerialRead_8723B(
> }
>
> /**
> -* Function: phy_RFSerialWrite_8723B
> -*
> -* OverView: Write data to RF register (page 8~)
> -*
> -* Input:
> -* struct adapter * Adapter,
> -* RF_PATH eRFPath, Radio path of A/B/C/D
> -* u32 Offset, The target address to be read
> -* u32 Data The new register Data in the target bit position
> -* of the target to be read
> -*
> -* Output: None
> -* Return: None
> -* Note: Threre are three types of serial operations:
> -* 1. Software serial write
> -* 2. Hardware LSSI-Low Speed Serial Interface
> -* 3. Hardware HSSI-High speed
> -* serial write. Driver need to implement (1) and (2).
> -* This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
> + * phy_RFSerialWrite_8723B - Write data to RF register (page 8~).
> + * @Adapter:
> + * @eRFPath: Radio path of A/B/C/D
> + * @Offset: The target address to be read
> + * @Data: The new register Data in the target bit position
> + * of the target to be read
> + *
> + * .. Note:: Threre are three types of serial operations:
> + * 1. Software serial write
> + * 2. Hardware LSSI-Low Speed Serial Interface
> + * 3. Hardware HSSI-High speed
> + * serial write. Driver need to implement (1) and (2).
> + * This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
> *
> - * Note: For RF8256 only
> + * .. Note:: For RF8256 only
> * The total count of RTL8256(Zebra4) register is around 36 bit it only employs
> * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
> * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
> @@ -225,7 +213,7 @@ static u32 phy_RFSerialRead_8723B(
> *
> *
> *
> -*/
> + */
> static void phy_RFSerialWrite_8723B(
> struct adapter *Adapter,
> enum RF_PATH eRFPath,
> @@ -249,33 +237,33 @@ static void phy_RFSerialWrite_8723B(
> /* Put write addr in [5:0] and write data in [31:16] */
> /* */
> /* DataAndAddr = (Data<<16) | (NewOffset&0x3f); */
> - DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; /* T65 RF */
> + DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff;
> + /*T65 RF */

This doesn't make sense at all now.

>
> /* */
> /* Write Operation */
> /* */
> PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
> - /* RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%lx]= 0x%lx\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr)); */
> + /**
> + *RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%lx]= 0x%lx\n", eRFPath,
> + *pPhyReg->rf3wireOffset, DataAndAddr));
> + */

Delete.

>
> }
>
>
> /**
> -* Function: PHY_QueryRFReg
> -*
> -* OverView: Query "Specific bits" to RF register (page 8~)
> -*
> -* Input:
> -* struct adapter * Adapter,
> -* RF_PATH eRFPath, Radio path of A/B/C/D
> -* u32 RegAddr, The target address to be read
> -* u32 BitMask The target bit position in the target address
> -* to be read
> -*
> -* Output: None
> -* Return: u32 Readback value
> -* Note: This function is equal to "GetRFRegSetting" in PHY programming guide
> -*/
> + * PHY_QueryRFReg - Query "Specific bits" to RF register (page 8~).
> + * @Adapter:
> + * @eRFPath: Radio path of A/B/C/D
> + * @RegAdd: The target address to be read
> + * @BitMask: The target bit position in the target address
> + * to be read
> + *
> + * Return: Readback value
> + *
> + * .. Note:: This function is equal to "GetRFRegSetting" in PHY programming guide
> + */
> u32 PHY_QueryRFReg_8723B(
> struct adapter *Adapter,
> u8 eRFPath,
> @@ -296,23 +284,17 @@ u32 PHY_QueryRFReg_8723B(
> }
>
> /**
> -* Function: PHY_SetRFReg
> -*
> -* OverView: Write "Specific bits" to RF register (page 8~)
> -*
> -* Input:
> -* struct adapter * Adapter,
> -* RF_PATH eRFPath, Radio path of A/B/C/D
> -* u32 RegAddr, The target address to be modified
> -* u32 BitMask The target bit position in the target address
> -* to be modified
> -* u32 Data The new register Data in the target bit position
> -* of the target address
> -*
> -* Output: None
> -* Return: None
> -* Note: This function is equal to "PutRFRegSetting" in PHY programming guide
> -*/
> + * PHY_SetRFReg - Write "Specific bits" to RF register (page 8~).
> + * @Adapter:
> + * @eRFPath: Radio path of A/B/C/D
> + * @RegAddr: The target address to be modified
> + * @BitMask: The target bit position in the target address
> + * to be modified
> + * @Data: The new register Data in the target bit position
> + * of the target address
> + *
> + * .. Note:: This function is equal to "PutRFRegSetting" in PHY programming guide


Don't put a huge white space after the ::.

regards,
dan carpenter

> + */
> void PHY_SetRFReg_8723B(
> struct adapter *Adapter,
> u8 eRFPath,
> @@ -344,15 +326,7 @@ void PHY_SetRFReg_8723B(
>
>
> /*-----------------------------------------------------------------------------
> - * Function: PHY_MACConfig8192C
> - *
> - * Overview: Condig MAC by header file or parameter file.
> - *
> - * Input: NONE
> - *
> - * Output: NONE
> - *
> - * Return: NONE
> + * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
> *
> * Revised History:
> * When Who Remark
> @@ -369,17 +343,12 @@ s32 PHY_MACConfig8723B(struct adapter *Adapter)
> }
>
> /**
> -* Function: phy_InitBBRFRegisterDefinition
> -*
> -* OverView: Initialize Register definition offset for Radio Path A/B/C/D
> -*
> -* Input:
> -* struct adapter * Adapter,
> -*
> -* Output: None
> -* Return: None
> -* Note: The initialization value is constant and it should never be changes
> -*/
> + * phy_InitBBRFRegisterDefinition - Initialize Register definition offset for
> + * Radio Path A/B/C/D
> + * @Adapter:
> + *
> + * .. Note:: The initialization value is constant and it should never be changes
> + */
> static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter)
> {
> struct hal_com_data *pHalData = GET_HAL_DATA(Adapter);
> @@ -675,6 +644,7 @@ static void phy_SetRegBW_8723B(
> )
> {
> u16 RegRfMod_BW, u2tmp = 0;
> +


This is not related to comments. Do it in a separate patch.

> RegRfMod_BW = rtw_read16(Adapter, REG_TRXPTCL_CTL_8723B);
>
> switch (CurrentBW) {
> @@ -789,7 +759,7 @@ static void phy_PostSetBwMode8723B(struct adapter *Adapter)
>
> PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0);
>
> -/* PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 1); */
> + /*PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 1); */

This format is wrong. Anyway, just delete the commented out code.

regards,
dan carpenter

\
 
 \ /
  Last update: 2021-02-10 09:09    [W:0.083 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site