lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 2/9] net: phy: icplus: use PHY_ID_MATCH_EXACT() for IP101A/G
Date
According to the datasheet of the IP101A/G there is no revision field
and MII_PHYSID2 always reads as 0x0c54. Use PHY_ID_MATCH_EXACT() then.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes since v2:
- none

Changes since v1:
- none

drivers/net/phy/icplus.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 4407b1eb1a3d..ae3cf61c5ac2 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -349,7 +349,7 @@ static struct phy_driver icplus_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- PHY_ID_MATCH_MODEL(IP101A_PHY_ID),
+ PHY_ID_MATCH_EXACT(IP101A_PHY_ID),
.name = "ICPlus IP101A/G",
/* PHY_BASIC_FEATURES */
.probe = ip101a_g_probe,
@@ -365,7 +365,7 @@ module_phy_driver(icplus_driver);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ PHY_ID_MATCH_MODEL(IP175C_PHY_ID) },
{ PHY_ID_MATCH_MODEL(IP1001_PHY_ID) },
- { PHY_ID_MATCH_MODEL(IP101A_PHY_ID) },
+ { PHY_ID_MATCH_EXACT(IP101A_PHY_ID) },
{ }
};

--
2.20.1
\
 
 \ /
  Last update: 2021-02-10 22:11    [W:0.061 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site