lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 1/9] net: phy: icplus: use PHY_ID_MATCH_MODEL() macro
Date
Simpify the initializations of the structures. There is no functional
change.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes since v2:
- none

Changes since v1:
- none

drivers/net/phy/icplus.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index b632947cbcdf..4407b1eb1a3d 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -47,6 +47,10 @@ MODULE_LICENSE("GPL");
#define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d
#define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2)

+#define IP175C_PHY_ID 0x02430d80
+#define IP1001_PHY_ID 0x02430d90
+#define IP101A_PHY_ID 0x02430c54
+
/* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin
* (pin number 21). The hardware default is RXER (receive error) mode. But it
* can be configured to interrupt mode manually.
@@ -329,9 +333,8 @@ static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev)

static struct phy_driver icplus_driver[] = {
{
- .phy_id = 0x02430d80,
+ PHY_ID_MATCH_MODEL(IP175C_PHY_ID),
.name = "ICPlus IP175C",
- .phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
.config_init = &ip175c_config_init,
.config_aneg = &ip175c_config_aneg,
@@ -339,17 +342,15 @@ static struct phy_driver icplus_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = 0x02430d90,
+ PHY_ID_MATCH_MODEL(IP1001_PHY_ID),
.name = "ICPlus IP1001",
- .phy_id_mask = 0x0ffffff0,
/* PHY_GBIT_FEATURES */
.config_init = &ip1001_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = 0x02430c54,
+ PHY_ID_MATCH_MODEL(IP101A_PHY_ID),
.name = "ICPlus IP101A/G",
- .phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
.probe = ip101a_g_probe,
.config_intr = ip101a_g_config_intr,
@@ -362,9 +363,9 @@ static struct phy_driver icplus_driver[] = {
module_phy_driver(icplus_driver);

static struct mdio_device_id __maybe_unused icplus_tbl[] = {
- { 0x02430d80, 0x0ffffff0 },
- { 0x02430d90, 0x0ffffff0 },
- { 0x02430c54, 0x0ffffff0 },
+ { PHY_ID_MATCH_MODEL(IP175C_PHY_ID) },
+ { PHY_ID_MATCH_MODEL(IP1001_PHY_ID) },
+ { PHY_ID_MATCH_MODEL(IP101A_PHY_ID) },
{ }
};

--
2.20.1
\
 
 \ /
  Last update: 2021-02-10 22:11    [W:0.952 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site