lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 12/16] KVM: x86: Introduce new KVM_FEATURE_SEV_LIVE_MIGRATION feature & Custom MSR.
Hello Steve,

On Mon, Feb 08, 2021 at 02:50:14PM -0800, Steve Rutherford wrote:
> Hi Ashish,
>
> On Sun, Feb 7, 2021 at 4:29 PM Ashish Kalra <ashish.kalra@amd.com> wrote:
> >
> > Hello Steve,
> >
> > On Sat, Feb 06, 2021 at 01:56:46PM +0000, Ashish Kalra wrote:
> > > Hello Steve,
> > >
> > > On Sat, Feb 06, 2021 at 05:46:17AM +0000, Ashish Kalra wrote:
> > > > Hello Steve,
> > > >
> > > > Continued response to your queries, especially related to userspace
> > > > control of SEV live migration feature :
> > > >
> > > > On Fri, Feb 05, 2021 at 06:54:21PM -0800, Steve Rutherford wrote:
> > > > > On Thu, Feb 4, 2021 at 7:08 PM Ashish Kalra <ashish.kalra@amd.com> wrote:
> > > > > >
> > > > > > Hello Steve,
> > > > > >
> > > > > > On Thu, Feb 04, 2021 at 04:56:35PM -0800, Steve Rutherford wrote:
> > > > > > > On Wed, Feb 3, 2021 at 4:39 PM Ashish Kalra <Ashish.Kalra@amd.com> wrote:
> > > > > > > >
> > > > > > > > From: Ashish Kalra <ashish.kalra@amd.com>
> > > > > > > >
> > > > > > > > Add new KVM_FEATURE_SEV_LIVE_MIGRATION feature for guest to check
> > > > > > > > for host-side support for SEV live migration. Also add a new custom
> > > > > > > > MSR_KVM_SEV_LIVE_MIGRATION for guest to enable the SEV live migration
> > > > > > > > feature.
> > > > > > > >
> > > > > > > > Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
> > > > > > > > ---
> > > > > > > > Documentation/virt/kvm/cpuid.rst | 5 +++++
> > > > > > > > Documentation/virt/kvm/msr.rst | 12 ++++++++++++
> > > > > > > > arch/x86/include/uapi/asm/kvm_para.h | 4 ++++
> > > > > > > > arch/x86/kvm/svm/sev.c | 13 +++++++++++++
> > > > > > > > arch/x86/kvm/svm/svm.c | 16 ++++++++++++++++
> > > > > > > > arch/x86/kvm/svm/svm.h | 2 ++
> > > > > > > > 6 files changed, 52 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/Documentation/virt/kvm/cpuid.rst b/Documentation/virt/kvm/cpuid.rst
> > > > > > > > index cf62162d4be2..0bdb6cdb12d3 100644
> > > > > > > > --- a/Documentation/virt/kvm/cpuid.rst
> > > > > > > > +++ b/Documentation/virt/kvm/cpuid.rst
> > > > > > > > @@ -96,6 +96,11 @@ KVM_FEATURE_MSI_EXT_DEST_ID 15 guest checks this feature bit
> > > > > > > > before using extended destination
> > > > > > > > ID bits in MSI address bits 11-5.
> > > > > > > >
> > > > > > > > +KVM_FEATURE_SEV_LIVE_MIGRATION 16 guest checks this feature bit before
> > > > > > > > + using the page encryption state
> > > > > > > > + hypercall to notify the page state
> > > > > > > > + change
> > > > > > > > +
> > > > > > > > KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24 host will warn if no guest-side
> > > > > > > > per-cpu warps are expected in
> > > > > > > > kvmclock
> > > > > > > > diff --git a/Documentation/virt/kvm/msr.rst b/Documentation/virt/kvm/msr.rst
> > > > > > > > index e37a14c323d2..020245d16087 100644
> > > > > > > > --- a/Documentation/virt/kvm/msr.rst
> > > > > > > > +++ b/Documentation/virt/kvm/msr.rst
> > > > > > > > @@ -376,3 +376,15 @@ data:
> > > > > > > > write '1' to bit 0 of the MSR, this causes the host to re-scan its queue
> > > > > > > > and check if there are more notifications pending. The MSR is available
> > > > > > > > if KVM_FEATURE_ASYNC_PF_INT is present in CPUID.
> > > > > > > > +
> > > > > > > > +MSR_KVM_SEV_LIVE_MIGRATION:
> > > > > > > > + 0x4b564d08
> > > > > > > > +
> > > > > > > > + Control SEV Live Migration features.
> > > > > > > > +
> > > > > > > > +data:
> > > > > > > > + Bit 0 enables (1) or disables (0) host-side SEV Live Migration feature,
> > > > > > > > + in other words, this is guest->host communication that it's properly
> > > > > > > > + handling the shared pages list.
> > > > > > > > +
> > > > > > > > + All other bits are reserved.
> > > > > > > > diff --git a/arch/x86/include/uapi/asm/kvm_para.h b/arch/x86/include/uapi/asm/kvm_para.h
> > > > > > > > index 950afebfba88..f6bfa138874f 100644
> > > > > > > > --- a/arch/x86/include/uapi/asm/kvm_para.h
> > > > > > > > +++ b/arch/x86/include/uapi/asm/kvm_para.h
> > > > > > > > @@ -33,6 +33,7 @@
> > > > > > > > #define KVM_FEATURE_PV_SCHED_YIELD 13
> > > > > > > > #define KVM_FEATURE_ASYNC_PF_INT 14
> > > > > > > > #define KVM_FEATURE_MSI_EXT_DEST_ID 15
> > > > > > > > +#define KVM_FEATURE_SEV_LIVE_MIGRATION 16
> > > > > > > >
> > > > > > > > #define KVM_HINTS_REALTIME 0
> > > > > > > >
> > > > > > > > @@ -54,6 +55,7 @@
> > > > > > > > #define MSR_KVM_POLL_CONTROL 0x4b564d05
> > > > > > > > #define MSR_KVM_ASYNC_PF_INT 0x4b564d06
> > > > > > > > #define MSR_KVM_ASYNC_PF_ACK 0x4b564d07
> > > > > > > > +#define MSR_KVM_SEV_LIVE_MIGRATION 0x4b564d08
> > > > > > > >
> > > > > > > > struct kvm_steal_time {
> > > > > > > > __u64 steal;
> > > > > > > > @@ -136,4 +138,6 @@ struct kvm_vcpu_pv_apf_data {
> > > > > > > > #define KVM_PV_EOI_ENABLED KVM_PV_EOI_MASK
> > > > > > > > #define KVM_PV_EOI_DISABLED 0x0
> > > > > > > >
> > > > > > > > +#define KVM_SEV_LIVE_MIGRATION_ENABLED BIT_ULL(0)
> > > > > > > > +
> > > > > > > > #endif /* _UAPI_ASM_X86_KVM_PARA_H */
> > > > > > > > diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
> > > > > > > > index b0d324aed515..93f42b3d3e33 100644
> > > > > > > > --- a/arch/x86/kvm/svm/sev.c
> > > > > > > > +++ b/arch/x86/kvm/svm/sev.c
> > > > > > > > @@ -1627,6 +1627,16 @@ int svm_page_enc_status_hc(struct kvm *kvm, unsigned long gpa,
> > > > > > > > return ret;
> > > > > > > > }
> > > > > > > >
> > > > > > > > +void sev_update_migration_flags(struct kvm *kvm, u64 data)
> > > > > > > > +{
> > > > > > > > + struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
> > > > > > > > +
> > > > > > > > + if (!sev_guest(kvm))
> > > > > > > > + return;
> > > > > > >
> > > > > > > This should assert that userspace wanted the guest to be able to make
> > > > > > > these calls (see more below).
> > > > > > >
> > > > > > > >
> > > > > > > > +
> > > > > > > > + sev->live_migration_enabled = !!(data & KVM_SEV_LIVE_MIGRATION_ENABLED);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > int svm_get_shared_pages_list(struct kvm *kvm,
> > > > > > > > struct kvm_shared_pages_list *list)
> > > > > > > > {
> > > > > > > > @@ -1639,6 +1649,9 @@ int svm_get_shared_pages_list(struct kvm *kvm,
> > > > > > > > if (!sev_guest(kvm))
> > > > > > > > return -ENOTTY;
> > > > > > > >
> > > > > > > > + if (!sev->live_migration_enabled)
> > > > > > > > + return -EINVAL;
> > > > >
> > > > > This is currently under guest control, so I'm not certain this is
> > > > > helpful. If I called this with otherwise valid parameters, and got
> > > > > back -EINVAL, I would probably think the bug is on my end. But it
> > > > > could be on the guest's end! I would probably drop this, but you could
> > > > > have KVM return an empty list of regions when this happens.
> > > > >
> > > > > Alternatively, as explained below, this could call guest_pv_has instead.
> > > > >
> > > > > >
> > > > > > > > +
> > > > > > > > if (!list->size)
> > > > > > > > return -EINVAL;
> > > > > > > >
> > > > > > > > diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
> > > > > > > > index 58f89f83caab..43ea5061926f 100644
> > > > > > > > --- a/arch/x86/kvm/svm/svm.c
> > > > > > > > +++ b/arch/x86/kvm/svm/svm.c
> > > > > > > > @@ -2903,6 +2903,9 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
> > > > > > > > svm->msr_decfg = data;
> > > > > > > > break;
> > > > > > > > }
> > > > > > > > + case MSR_KVM_SEV_LIVE_MIGRATION:
> > > > > > > > + sev_update_migration_flags(vcpu->kvm, data);
> > > > > > > > + break;
> > > > > > > > case MSR_IA32_APICBASE:
> > > > > > > > if (kvm_vcpu_apicv_active(vcpu))
> > > > > > > > avic_update_vapic_bar(to_svm(vcpu), data);
> > > > > > > > @@ -3976,6 +3979,19 @@ static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
> > > > > > > > vcpu->arch.cr3_lm_rsvd_bits &= ~(1UL << (best->ebx & 0x3f));
> > > > > > > > }
> > > > > > > >
> > > > > > > > + /*
> > > > > > > > + * If SEV guest then enable the Live migration feature.
> > > > > > > > + */
> > > > > > > > + if (sev_guest(vcpu->kvm)) {
> > > > > > > > + struct kvm_cpuid_entry2 *best;
> > > > > > > > +
> > > > > > > > + best = kvm_find_cpuid_entry(vcpu, KVM_CPUID_FEATURES, 0);
> > > > > > > > + if (!best)
> > > > > > > > + return;
> > > > > > > > +
> > > > > > > > + best->eax |= (1 << KVM_FEATURE_SEV_LIVE_MIGRATION);
> > > > > > > > + }
> > > > > > > > +
> > > > > > >
> > > > > > > Looking at this, I believe the only way for this bit to get enabled is
> > > > > > > if userspace toggles it. There needs to be a way for userspace to
> > > > > > > identify if the kernel underneath them does, in fact, support SEV LM.
> > > > > > > I'm at risk for having misread these patches (it's a long series), but
> > > > > > > I don't see anything that communicates upwards.
> > > > > > >
> > > > > > > This could go upward with the other paravirt features flags in
> > > > > > > cpuid.c. It could also be an explicit KVM Capability (checked through
> > > > > > > check_extension).
> > > > > > >
> > > > > > > Userspace should then have a chance to decide whether or not this
> > > > > > > should be enabled. And when it's not enabled, the host should return a
> > > > > > > GP in response to the hypercall. This could be configured either
> > > > > > > through userspace stripping out the LM feature bit, or by calling a VM
> > > > > > > scoped enable cap (KVM_VM_IOCTL_ENABLE_CAP).
> > > > > > >
> > > > > > > I believe the typical path for a feature like this to be configured
> > > > > > > would be to use ENABLE_CAP.
> > > > > >
> > > > > > I believe we have discussed and reviewed this earlier too.
> > > > > >
> > > > > > To summarize this feature, the host indicates if it supports the Live
> > > > > > Migration feature and the feature and the hypercall are only enabled on
> > > > > > the host when the guest checks for this support and does a wrmsrl() to
> > > > > > enable the feature. Also the guest will not make the hypercall if the
> > > > > > host does not indicate support for it.
> > > > >
> > > > > I've gone through and read this patch a bit more closely, and the
> > > > > surrounding code. Previously, I clearly misread this and the
> > > > > surrounding space.
> > > > >
> > > > > What happens if the guest just writes to the MSR anyway? Even if it
> > > > > didn't receive a cue to do so? I believe the hypercall would still get
> > > > > invoked here, since the hypercall does not check if SEV live migration
> > > > > is enabled. Similarly, the MSR for enabling it is always available,
> > > > > even if userspace didn't ask for the cpuid bit to be set. This should
> > > > > not happen. Userspace should be in control of a new hypercall rolling
> > > > > out.
> > > > >
> > > > > I believe my interpretation last time was that the cpuid bit was
> > > > > getting surfaced from the host kernel to host userspace, but I don't
> > > > > actually see that in this patch series. Another way to ask this
> > > > > question would be "How does userspace know the kernel they are on has
> > > > > this patch series?". It needs some way of checking whether or not the
> > > > > kernel underneath it supports SEV live migration. Technically, I think
> > > > > userspace could call get_cpuid, set_cpuid (with the same values), and
> > > > > then get_cpuid again, and it would be able to infer by checking the
> > > > > SEV LM feature flag in the KVM leaf. This seems a bit kludgy. Checking
> > > > > support should be easy.
> > > > >
> > > > > An additional question is "how does userspace choose whether live
> > > > > migration is advertised to the guest"? I believe userspace's desire
> > > > > for a particular value of the paravirt feature flag in CPUID get's
> > > > > overridden when they call set cpuid, since the feature flag is set in
> > > > > svm_vcpu_after_set_cpuid regardless of what userspace asks for.
> > > > > Userspace should have a choice in the matter.
> > > > >
> > >
> > > Actually i did some more analysis of this, and i believe you are right
> > > about the above, feature flag gets set in svm_vcpu_after_set_cpuid.
> > >
> >
> > As you mentioned above and as i confirmed in my previous email,
> > calling KVM_SET_CPUID2 vcpu ioctl will always set the live migration
> > feature flag for the vCPU.
> >
> > This is what will be queried by the guest to enable the kernel's
> > live migration feature and to start making hypercalls.
> >
> > Now, i want to understand why do you want the userspace to have a
> > choice in this matter ?
> Kernel rollout risk is a pretty big factor:
> 1) Feature flagging is a pretty common risk mitigation for new features.
> 2) Without userspace being able to intervene, the kernel rollout
> becomes a feature rollout.
>
> IIUC, as soon as new VMs started running on this host kernel, they
> would immediately start calling the hypercall if they had the guest
> patches, even if they did not do so on older versions of the host
> kernel.
>
> >
> > After all, it is the userspace which actually initiates the live
> > migration process, so doesn't it have the final choice in this
> > matter ?
> With the current implementation, userspace has the final say in the
> migration, but not the final say in whether or not that particular
> hypercall is used by the guest. If a customer showed up, and said
> "don't have my guest migrate", there is no way for the host to tell
> the guest "hey, we're not even listening to what you're sending over
> the hypercall". IIRC, there is an SEV Policy bit for migration
> enablement, but even if it were set to false, that guest would still
> update the host about its unencrypted regions.
>
> Right now, the host can't even remove the feature bit from CPUID
> (since its desire would be overridden post-set), so it doesn't have
> the ability to tell the guest to hang up the phone. And even if we
> could tell the guest through CPUID, if the guest ignored what we told
> it, it could still send data down anyway! If there were a bug in this
> implementation that we missed, the only way to avoid it would be to
> roll out a new kernel, which is pretty heavy handed. If you could just
> disable the feature (or never enable it in the first place), that
> would be much less costly.
>

We can remove the implicit enabling of this live migration feature
from svm_vcpu_after_set_cpuid() callback invoked afer KVM_SET_CPUID2
ioctl, and let this feature flag be controlled by the userspace
VMM/qemu.

Userspace can set this feature flag explicitly by calling the
KVM_SET_CPUID2 ioctl and enable this feature whenever it is ready to
do so.

I have tested this as part of Qemu code :

int kvm_arch_init_vcpu(CPUState *cs)
{
...
...
c->function = KVM_CPUID_FEATURES | kvm_base;
c->eax = env->features[FEAT_KVM];
c->eax |= (1 << KVM_FEATURE_SEV_LIVE_MIGRATION);
...
...

r = kvm_vcpu_ioctl(cs, KVM_SET_CPUID2, &cpuid_data);
...

Let me know if this addresses your concerns.

Thanks,
Ashish

\
 
 \ /
  Last update: 2021-02-10 21:39    [W:0.268 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site