lkml.org 
[lkml]   [2021]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] vsprintf: dump full information of page flags in pGp
On Mon, Feb 1, 2021 at 9:27 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Mon, Feb 01, 2021 at 07:56:10PM +0800, Yafang Shao wrote:
> > Currently the pGp only shows the names of page flags, rather than
> > the full information including section, node, zone, last cpupid and
> > kasan tag. While it is not easy to parse these information manually
> > because there're so many flavors. Let's interpret them in pGp as well.
> >
> > - Before the patch,
> > [ 6343.396602] Slab 0x000000004382e02b objects=33 used=3 fp=0x000000009ae06ffc flags=0x17ffffc0010200(slab|head)
> >
> > - After the patch,
> > [ 6871.296131] Slab 0x00000000c0e19a37 objects=33 used=3 fp=0x00000000c4902159 flags=0x17ffffc0010200(Node 0,Zone 2,Lastcpupid 0x1fffff,slab|head)
> >
> > The Documentation and test cases are also updated.
>
> Thanks for an update, my comments below.
>
> ...
>
> > - %pGp referenced|uptodate|lru|active|private
> > + %pGp Node 0,Zone 2,referenced|uptodate|lru|active|private
>
> Since of the nature of printf() buffer, I wonder if these should be at the end.
> I.o.w. the question is is the added material more important to user to see than
> the existed one?
>

The existing one should be more important than the added one.
But the order of output will not match with the value for page->flags.
E.g.
flags=0x17ffffc0010200(slab|head,Node 0,Zone 2,Lastcpupid 0x1fffff)
It may be strange to compare the value with the string.

> ...
>
> > +static void __init
> > +page_flags_test(int section, int node, int zone, int last_cpupid,
> > + int kasan_tag, int flags, const char *name, char *cmp_buf)
> > +{
> > + unsigned long page_flags = 0;
> > + unsigned long size = 0;
> > +
> > +#ifdef SECTION_IN_PAGE_FLAGS
> > + page_flags |= (sec & SECTIONS_MASK) << SECTIONS_PGSHIFT;
> > + snprintf(cmp_buf, BUF_SIZE, "Section %#x,", sec);
>
> I would keep it in the same form as latter ones, i.e.
>
> snprintf(cmp_buf + size, BUF_SIZE - size, "Section %#x,", sec);
>
> In this case it will be easier if at some point we might need to reshuffle.
>

Good suggestion.

> > + size = strlen(cmp_buf);
> > +#endif
> > +
> > + page_flags |= (node & NODES_MASK) << NODES_PGSHIFT;
> > + snprintf(cmp_buf + size, BUF_SIZE - size, "Node %d", node);
> > + size = strlen(cmp_buf);
> > +
> > + page_flags |= (zone & ZONES_MASK) << ZONES_PGSHIFT;
> > + snprintf(cmp_buf + size, BUF_SIZE - size, ",Zone %d", zone);
> > + size = strlen(cmp_buf);
> > +
> > +#ifndef LAST_CPUPID_NOT_IN_PAGE_FLAGS
> > + page_flags |= (last_cpupid & LAST_CPUPID_MASK) << LAST_CPUPID_PGSHIFT;
> > + snprintf(cmp_buf + size, BUF_SIZE - size, ",Lastcpupid %#x", last_cpupid);
> > + size = strlen(cmp_buf);
> > +#endif
> > +
> > +#if defined(CONFIG_KASAN_SW_TAGS) || defined(CONFIG_KASAN_HW_TAGS)
> > + page_flags |= (tag & KASAN_TAG_MASK) << KASAN_TAG_PGSHIFT;
> > + snprintf(cmp_buf + size, BUF_SIZE - size, ",Kasantag %#x", tag);
> > + size = strlen(cmp_buf);
> > +#endif
> > +
> > + test(cmp_buf, "%pGp", &page_flags);
> > +
> > + if (flags) {
>
> If below will be always for flags set, I would rewrite this condition as
>
> if (!flags)
> return;
>
> but it's up to you.
>
> > + page_flags |= flags;
> > + snprintf(cmp_buf + size, BUF_SIZE - size, ",%s", name);
> > + test(cmp_buf, "%pGp", &page_flags);
> > + }
> > +}
>
> ...
>
> > - flags = 0;
>
> > - flags |= 1UL << PG_uptodate | 1UL << PG_dirty | 1UL << PG_lru
> > - | 1UL << PG_active | 1UL << PG_swapbacked;
>
> I would leave this untouched and reuse below...
>
> > + cmp_buffer = kmalloc(BUF_SIZE, GFP_KERNEL);
> > + if (!cmp_buffer)
> > + return;
>
> ...as
>
> > + page_flags_test(0, 0, 0, 0, 0, 0, NULL, cmp_buffer);
>
> flags = 0;
> page_flags_test(0, 0, 0, 0, 0, flags, NULL, cmp_buffer);
>
> > + page_flags_test(1, 1, 1, 0x1ffff, 1,
> > + (1UL << PG_uptodate | 1UL << PG_dirty | 1UL << PG_lru
> > + | 1UL << PG_active | 1UL << PG_swapbacked),
> > + "uptodate|dirty|lru|active|swapbacked",
> > + cmp_buffer);
>
> flags |= 1UL << PG_uptodate | 1UL << PG_dirty | 1UL << PG_lru
> | 1UL << PG_active | 1UL << PG_swapbacked;
> page_flags_test(1, 1, 1, 0x1ffff, 1, flags,
> "uptodate|dirty|lru|active|swapbacked",
> cmp_buffer);
>

Sure, I will change them.

> ...
>
> > +static const struct page_flags_layout pfl[] = {
> > + {SECTIONS_WIDTH, SECTIONS_PGSHIFT, SECTIONS_MASK,
> > + &default_dec_spec, "Section "},
> > + {NODES_WIDTH, NODES_PGSHIFT, NODES_MASK,
> > + &default_dec_spec, "Node "},
> > + {ZONES_WIDTH, ZONES_PGSHIFT, ZONES_MASK,
> > + &default_dec_spec, "Zone "},
> > + {LAST_CPUPID_WIDTH, LAST_CPUPID_PGSHIFT, LAST_CPUPID_MASK,
> > + &default_flag_spec, "Lastcpupid "},
> > + {KASAN_TAG_WIDTH, KASAN_TAG_PGSHIFT, KASAN_TAG_MASK,
> > + &default_flag_spec, "Kasantag "},
> > +};
>
> Please add trailing space only once where it's needed (below in the code).
>
> ...
>
> > +static
> > +char *format_page_flags(char *buf, char *end, unsigned long page_flags)
> > +{
> > + unsigned long flags = page_flags & ((1UL << NR_PAGEFLAGS) - 1);
> > + int size = ARRAY_SIZE(pfl);
> > + bool separator = false;
> > + int i;
> > +
> > + for (i = 0; i < size; i++) {
> > + if (pfl[i].width == 0)
> > + continue;
> > +
> > + if (separator) {
> > + if (buf < end)
> > + *buf = ',';
> > + buf++;
> > + }
>
> > +
> > +
>
> One blank line is enough.
>

Thanks for pointing it out.

BTW, it seems we need to improve the check_patch to catch this kind of
issue automatically.

> > + buf = string(buf, end, pfl[i].name, *pfl[i].spec);
> > +
> > + buf = number(buf, end, (page_flags >> pfl[i].shift) & pfl[i].mask,
> > + *pfl[i].spec);
> > + separator = true;
> > + }
> > +
> > + if (flags) {
> > + if (buf < end)
> > + *buf = ',';
> > + buf++;
> > + }
>
> I think you may optimize above to avoid using the separator variable.
>
> DECLARE_BITMAP(mask, ARRAY_SIZE(pfl));
> unsigned long flags;
> unsigned long last;
>
> for (i = 0; i < ARRAY_SIZE(pfl); i++)
> __assign_bit(mask, pfl[i].width);
>
> last = find_last_bit(mask, ARRAY_SIZE(pfl));
>
> for_each_set_bit(i, mask, ARRAY_SIZE(pfl)) {
> flags = (page_flags >> pfl[i].shift) & pfl[i].mask;
>
> /* Format: Flag Name + ' ' (space) + Number + ',' (separator) */
> buf = string(buf, end, pfl[i].name, *pfl[i].spec);
>
> if (buf < end)
> *buf = ' ';
> buf++;
>
> buf = number(buf, end, flags, *pfl[i].spec);
>
> /* No separator for the last entry */
> if ((page_flags & (BIT(NR_PAGEFLAGS) - 1)) || (i != last)) {
> if (buf < end)
> *buf = ',';
> buf++;
> }
> }
>

Good suggestion. I will think about it.

--
Thanks
Yafang

\
 
 \ /
  Last update: 2021-02-01 14:53    [W:0.317 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site