lkml.org 
[lkml]   [2021]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] vdpa/mlx5: Restore the hardware used index after change map
On Mon, Feb 01, 2021 at 11:36:23AM +0800, Jason Wang wrote:
>
> On 2021/2/1 上午2:55, Eli Cohen wrote:
> > On Fri, Jan 29, 2021 at 11:49:45AM +0800, Jason Wang wrote:
> > > On 2021/1/28 下午9:41, Eli Cohen wrote:
> > > > When a change of memory map occurs, the hardware resources are destroyed
> > > > and then re-created again with the new memory map. In such case, we need
> > > > to restore the hardware available and used indices. The driver failed to
> > > > restore the used index which is added here.
> > > >
> > > > Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> > > > Signed-off-by: Eli Cohen <elic@nvidia.com>
> > >
> > > A question. Does this mean after a vq is suspended, the hw used index is not
> > > equal to vq used index?
> > Surely there is just one "Used index" for a VQ. What I was trying to say
> > is that after the VQ is suspended, I read the used index by querying the
> > hardware. The read result is the used index that the hardware wrote to
> > memory.
>
>
> Just to make sure I understand here. So it looks to me we had two index. The
> first is the used index which is stored in the memory/virtqueue, the second
> is the one that is stored by the device.
>

It is the structures defined in the virtio spec in 2.6.6 for the
available ring and 2.6.8 for the used ring. As you know these the
available ring is written to by the driver and read by the device. The
opposite happens for the used index.
The reason I need to restore the last known indices is for the new
hardware objects to sync on the last state and take over from there.

>
> > After the I create the new hardware object, I need to tell it
> > what is the used index (and the available index) as a way to sync it
> > with the existing VQ.
>
>
> For avail index I understand that the hardware index is not synced with the
> avail index stored in the memory/virtqueue. The question is used index, if
> the hardware one is not synced with the one in the virtqueue. It means after
> vq is suspended,  some requests is not completed by the hardware (e.g the
> buffer were not put to used ring).
>
> This may have implications to live migration, it means those unaccomplished
> requests needs to be migrated to the destination and resubmitted to the
> device. This looks not easy.
>
> Thanks
>
>
> >
> > This sync is especially important when a change of map occurs while the
> > VQ was already used (hence the indices are likely to be non zero). This
> > can be triggered by hot adding memory after the VQs have been used.
> >
> > > Thanks
> > >
> > >
> > > > ---
> > > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 +++++++
> > > > 1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > index 549ded074ff3..3fc8588cecae 100644
> > > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > @@ -87,6 +87,7 @@ struct mlx5_vq_restore_info {
> > > > u64 device_addr;
> > > > u64 driver_addr;
> > > > u16 avail_index;
> > > > + u16 used_index;
> > > > bool ready;
> > > > struct vdpa_callback cb;
> > > > bool restore;
> > > > @@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue {
> > > > u32 virtq_id;
> > > > struct mlx5_vdpa_net *ndev;
> > > > u16 avail_idx;
> > > > + u16 used_idx;
> > > > int fw_state;
> > > > /* keep last in the struct */
> > > > @@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque
> > > > obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in, obj_context);
> > > > MLX5_SET(virtio_net_q_object, obj_context, hw_available_index, mvq->avail_idx);
> > > > + MLX5_SET(virtio_net_q_object, obj_context, hw_used_index, mvq->used_idx);
> > > > MLX5_SET(virtio_net_q_object, obj_context, queue_feature_bit_mask_12_3,
> > > > get_features_12_3(ndev->mvdev.actual_features));
> > > > vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context, virtio_q_context);
> > > > @@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m
> > > > struct mlx5_virtq_attr {
> > > > u8 state;
> > > > u16 available_index;
> > > > + u16 used_index;
> > > > };
> > > > static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *mvq,
> > > > @@ -1052,6 +1056,7 @@ static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu
> > > > memset(attr, 0, sizeof(*attr));
> > > > attr->state = MLX5_GET(virtio_net_q_object, obj_context, state);
> > > > attr->available_index = MLX5_GET(virtio_net_q_object, obj_context, hw_available_index);
> > > > + attr->used_index = MLX5_GET(virtio_net_q_object, obj_context, hw_used_index);
> > > > kfree(out);
> > > > return 0;
> > > > @@ -1602,6 +1607,7 @@ static int save_channel_info(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu
> > > > return err;
> > > > ri->avail_index = attr.available_index;
> > > > + ri->used_index = attr.used_index;
> > > > ri->ready = mvq->ready;
> > > > ri->num_ent = mvq->num_ent;
> > > > ri->desc_addr = mvq->desc_addr;
> > > > @@ -1646,6 +1652,7 @@ static void restore_channels_info(struct mlx5_vdpa_net *ndev)
> > > > continue;
> > > > mvq->avail_idx = ri->avail_index;
> > > > + mvq->used_idx = ri->used_index;
> > > > mvq->ready = ri->ready;
> > > > mvq->num_ent = ri->num_ent;
> > > > mvq->desc_addr = ri->desc_addr;
>

\
 
 \ /
  Last update: 2021-02-01 07:03    [W:0.088 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site