lkml.org 
[lkml]   [2021]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 5/5] serial: 8250_dw: add em485 support
From
Date
Hi Andy,

Il 18/05/2020 17:21, Andy Shevchenko ha scritto:
> On Sun, May 17, 2020 at 11:56:10PM +0200, Heiko Stuebner wrote:
>> From: Giulio Benetti <giulio.benetti@micronovasrl.com>
>>
>> Need to use rs485 transceiver so let's use existing em485 485 emulation
>> layer on top of 8250.
>>
>> Add rs485_config callback to port and uses the standard em485 start and
>> stop helpers.
>
> Would it prevent to use native RS485 support?

8250_dw doesn't have a native RS485 support, do you mean using hardware
RTS assertion? Anyway at the moment it's not present. This would be the
first rs485 support added to 8250_dw.

Best regards
--
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> ...
>
>> p->serial_out = dw8250_serial_out;
>> p->set_ldisc = dw8250_set_ldisc;
>> p->set_termios = dw8250_set_termios;
>> + p->rs485_config = serial8250_em485_config;
>> + up->rs485_start_tx = serial8250_em485_start_tx;
>> + up->rs485_stop_tx = serial8250_em485_stop_tx;
>

\
 
 \ /
  Last update: 2021-02-02 01:35    [W:0.071 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site