lkml.org 
[lkml]   [2021]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] pmbus:max31785: Support revision "B"
From
Date

On 2/1/21 1:43 PM, Guenter Roeck wrote:
> On 2/1/21 8:50 AM, Matthew Barth wrote:
>> There was an issue in how the tach feedbacks of dual rotor fans were
>> reported during any change in fan speeds with revision "A" of the
>> MAX31785. When the fan speeds would transition to a new target speed,
>> the rotor not wired to the TACH input when TACHSEL = 0 would report a
>> speed of 0 until the new target was reached. This has been fixed,
>> resulting in a revision "B" update where the MFR_REVISION of "B" is
>> 0x3061.
>>
> Is that published somewhere ?
If you're referring to the issue noted, it is not explicitly published
anywhere that I'm aware of other than being functionally described on
pg22 within the MAX31785 datasheet under the 'Dual Fan Applicaitons'
paragraph(https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf). We
have worked with Maxim to get this addressed as the method of latching
the TACHSEL during speed transitions gives windows of being unable to
detect fan failures of the rotor that is not being read during the
transition.

In reference to revision "B" being published, Maxim provided a couple
samples with the issue noted fixed where it was noticed the MFR_REVISION
bumped to 0x3061. After I had verified the functionality of this
revision, they have started production of 31785's with this revision "B"
firmware. I can not speak to if/when they will update their datasheet.
>
>> Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
>> ---
>> drivers/hwmon/pmbus/max31785.c | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c
>> index e5a9f4019cd5..e636a65061df 100644
>> --- a/drivers/hwmon/pmbus/max31785.c
>> +++ b/drivers/hwmon/pmbus/max31785.c
>> @@ -17,6 +17,7 @@ enum max31785_regs {
>>
>> #define MAX31785 0x3030
>> #define MAX31785A 0x3040
>> +#define MAX31785B 0x3061
>>
>> #define MFR_FAN_CONFIG_DUAL_TACH BIT(12)
>>
>> @@ -350,12 +351,13 @@ static int max31785_probe(struct i2c_client *client)
>> if (ret < 0)
>> return ret;
>>
>> - if (ret == MAX31785A) {
>> + if (ret == MAX31785A || ret == MAX31785B) {
>> dual_tach = true;
>> } else if (ret == MAX31785) {
>> if (!strcmp("max31785a", client->name))
> Probably also wants to check for max31785b,
Good call, will do!
>
>> dev_warn(dev, "Expected max3175a, found max31785: cannot provide secondary tachometer readings\n");
> and say something like "Expected max3175a/b, ..."

Thanks,

Matt

>
> Thanks,
> Guenter
>
>> } else {
>> + dev_err(dev, "Unrecognized MAX31785 revision: %x\n", ret);
>> return -ENODEV;
>> }
>>
>> @@ -371,6 +373,7 @@ static int max31785_probe(struct i2c_client *client)
>> static const struct i2c_device_id max31785_id[] = {
>> { "max31785", 0 },
>> { "max31785a", 0 },
>> + { "max31785b", 0 },
>> { },
>> };
>>
>> @@ -379,6 +382,7 @@ MODULE_DEVICE_TABLE(i2c, max31785_id);
>> static const struct of_device_id max31785_of_match[] = {
>> { .compatible = "maxim,max31785" },
>> { .compatible = "maxim,max31785a" },
>> + { .compatible = "maxim,max31785b" },
>> { },
>> };
>>
>>

\
 
 \ /
  Last update: 2021-02-01 21:07    [W:0.079 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site