lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 11/28] ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
On Wed, Dec 15, 2021 at 05:52:24PM +0300, Dmitry Osipenko wrote:
> 15.12.2021 17:01, Thierry Reding пишет:
> > On Sun, Dec 12, 2021 at 12:13:55AM +0300, Dmitry Osipenko wrote:
> > [...]
> >> + i2c@1 {
> >> + reg = <1>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + dsi-bridge@7 {
> >> + compatible = "toshiba,tc358768";
> >> + reg = <0x7>;
> >> +
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + clocks = <&tc358768_osc>;
> >> + clock-names = "refclk";
> >> +
> >> + reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
> >> +
> >> + vddc-supply = <&vdd_1v2_mipi>;
> >> + vddio-supply = <&vdd_1v8_vio>;
> >> + vddmipi-supply = <&vdd_1v2_mipi>;
> >> +
> >> + ports {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + port@0 {
> >> + reg = <0>;
> >> +
> >> + bridge_input: endpoint {
> >> + remote-endpoint = <&dpi_output>;
> >> + data-lines = <24>;
> >> + };
> >> + };
> >> +
> >> + port@1 {
> >> + reg = <1>;
> >> +
> >> + bridge_output: endpoint {
> >> + remote-endpoint = <&panel_input>;
> >> + };
> >> + };
> >> + };
> >> +
> >> + /*
> >> + * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
> >> + * LCD SuperIPS+ Full HD panel.
> >> + */
> >> + panel@1 {
> >> + compatible = "panasonic,vvx10f004b00";
> >> + reg = <1>;
> >> +
> >> + power-supply = <&vdd_pnl>;
> >> + backlight = <&backlight>;
> >> +
> >> + port {
> >> + panel_input: endpoint {
> >> + remote-endpoint = <&bridge_output>;
> >> + };
> >> + };
> >> + };
> >
> > make dtbs_check complains about this and says that panel@1 (as well as
> > #address-cells and #size-cells) are not allowed here. And indeed the
> > binding for the Toshiba bridge doesn't mention them here.
> >
> > Do we need this here or should this be moved to the top level to fix
> > those warnings? I guess what you're doing above is describe a DSI bus
> > created by the DSI bridge, which also makes sense, so another
> > alternative would be to fix up the binding and let it accept those
> > properties.
>
> Toshiba bridge binding is incomplete. David has patch for that [1], I
> don't think that it was sent out yet.
>
> [1]
> https://github.com/okias/linux/commit/0875230062294b6db17f395ced0a8384a4c1cfc7

Okay, please make sure this finds its way upstream eventually. That
patch looks quite similar to what I tried to do to fix this up locally.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-12-15 16:19    [W:0.073 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site