Messages in this thread | | | Subject | Re: [PATCH v5 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs | From | Guenter Roeck <> | Date | Wed, 15 Dec 2021 13:52:08 -0800 |
| |
On 12/15/21 12:56 PM, Hans de Goede wrote: > Hi Wim, Guenter, > > On 12/13/21 13:05, Henning Schild wrote: >> This driver adds initial support for several devices from Siemens. It is >> based on a platform driver introduced in an earlier commit. >> >> One of the supported machines does access a GPIO pin to enable the >> watchdog. Here we poke GPIO memory because pinctrl does not come up. >> >> Signed-off-by: Henning Schild <henning.schild@siemens.com> >> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > > I see that this patch #includes linux/platform_data/x86/simatic-ipc-base.h > which gets added by patch 1/4. > > Since this has already been reviewed, can I take this patch upstream > through the pdx86 tree? Or shall I prepare an immutable branch with
Please go ahead and take the entire series.
Thanks, Guenter
> patch 1 for you to merge ? > > Regards, > > Hans > > > >> --- >> drivers/watchdog/Kconfig | 11 ++ >> drivers/watchdog/Makefile | 1 + >> drivers/watchdog/simatic-ipc-wdt.c | 228 +++++++++++++++++++++++++++++ >> 3 files changed, 240 insertions(+) >> create mode 100644 drivers/watchdog/simatic-ipc-wdt.c >> >> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig >> index 9d222ba17ec6..1dc86eb1361a 100644 >> --- a/drivers/watchdog/Kconfig >> +++ b/drivers/watchdog/Kconfig >> @@ -1589,6 +1589,17 @@ config NIC7018_WDT >> To compile this driver as a module, choose M here: the module will be >> called nic7018_wdt. >> >> +config SIEMENS_SIMATIC_IPC_WDT >> + tristate "Siemens Simatic IPC Watchdog" >> + depends on SIEMENS_SIMATIC_IPC >> + select WATCHDOG_CORE >> + help >> + This driver adds support for several watchdogs found in Industrial >> + PCs from Siemens. >> + >> + To compile this driver as a module, choose M here: the module will be >> + called simatic-ipc-wdt. >> + >> # M68K Architecture >> >> config M54xx_WATCHDOG >> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile >> index 2ee97064145b..31b931846e32 100644 >> --- a/drivers/watchdog/Makefile >> +++ b/drivers/watchdog/Makefile >> @@ -143,6 +143,7 @@ obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o >> obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o >> obj-$(CONFIG_MLX_WDT) += mlx_wdt.o >> obj-$(CONFIG_KEEMBAY_WATCHDOG) += keembay_wdt.o >> +obj-$(CONFIG_SIEMENS_SIMATIC_IPC_WDT) += simatic-ipc-wdt.o >> >> # M68K Architecture >> obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o >> diff --git a/drivers/watchdog/simatic-ipc-wdt.c b/drivers/watchdog/simatic-ipc-wdt.c >> new file mode 100644 >> index 000000000000..8bac793c63fb >> --- /dev/null >> +++ b/drivers/watchdog/simatic-ipc-wdt.c >> @@ -0,0 +1,228 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Siemens SIMATIC IPC driver for Watchdogs >> + * >> + * Copyright (c) Siemens AG, 2020-2021 >> + * >> + * Authors: >> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> >> + */ >> + >> +#include <linux/device.h> >> +#include <linux/errno.h> >> +#include <linux/init.h> >> +#include <linux/io.h> >> +#include <linux/ioport.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/pci.h> >> +#include <linux/platform_data/x86/simatic-ipc-base.h> >> +#include <linux/platform_device.h> >> +#include <linux/sizes.h> >> +#include <linux/util_macros.h> >> +#include <linux/watchdog.h> >> + >> +#define WD_ENABLE_IOADR 0x62 >> +#define WD_TRIGGER_IOADR 0x66 >> +#define GPIO_COMMUNITY0_PORT_ID 0xaf >> +#define PAD_CFG_DW0_GPP_A_23 0x4b8 >> +#define SAFE_EN_N_427E 0x01 >> +#define SAFE_EN_N_227E 0x04 >> +#define WD_ENABLED 0x01 >> +#define WD_TRIGGERED 0x80 >> +#define WD_MACROMODE 0x02 >> + >> +#define TIMEOUT_MIN 2 >> +#define TIMEOUT_DEF 64 >> +#define TIMEOUT_MAX 64 >> + >> +#define GP_STATUS_REG_227E 0x404D /* IO PORT for SAFE_EN_N on 227E */ >> + >> +static bool nowayout = WATCHDOG_NOWAYOUT; >> +module_param(nowayout, bool, 0000); >> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" >> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); >> + >> +static struct resource gp_status_reg_227e_res = >> + DEFINE_RES_IO_NAMED(GP_STATUS_REG_227E, SZ_1, KBUILD_MODNAME); >> + >> +static struct resource io_resource_enable = >> + DEFINE_RES_IO_NAMED(WD_ENABLE_IOADR, SZ_1, >> + KBUILD_MODNAME " WD_ENABLE_IOADR"); >> + >> +static struct resource io_resource_trigger = >> + DEFINE_RES_IO_NAMED(WD_TRIGGER_IOADR, SZ_1, >> + KBUILD_MODNAME " WD_TRIGGER_IOADR"); >> + >> +/* the actual start will be discovered with pci, 0 is a placeholder */ >> +static struct resource mem_resource = >> + DEFINE_RES_MEM_NAMED(0, SZ_4, "WD_RESET_BASE_ADR"); >> + >> +static u32 wd_timeout_table[] = {2, 4, 6, 8, 16, 32, 48, 64 }; >> +static void __iomem *wd_reset_base_addr; >> + >> +static int wd_start(struct watchdog_device *wdd) >> +{ >> + outb(inb(WD_ENABLE_IOADR) | WD_ENABLED, WD_ENABLE_IOADR); >> + return 0; >> +} >> + >> +static int wd_stop(struct watchdog_device *wdd) >> +{ >> + outb(inb(WD_ENABLE_IOADR) & ~WD_ENABLED, WD_ENABLE_IOADR); >> + return 0; >> +} >> + >> +static int wd_ping(struct watchdog_device *wdd) >> +{ >> + inb(WD_TRIGGER_IOADR); >> + return 0; >> +} >> + >> +static int wd_set_timeout(struct watchdog_device *wdd, unsigned int t) >> +{ >> + int timeout_idx = find_closest(t, wd_timeout_table, >> + ARRAY_SIZE(wd_timeout_table)); >> + >> + outb((inb(WD_ENABLE_IOADR) & 0xc7) | timeout_idx << 3, WD_ENABLE_IOADR); >> + wdd->timeout = wd_timeout_table[timeout_idx]; >> + return 0; >> +} >> + >> +static const struct watchdog_info wdt_ident = { >> + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | >> + WDIOF_SETTIMEOUT, >> + .identity = KBUILD_MODNAME, >> +}; >> + >> +static const struct watchdog_ops wdt_ops = { >> + .owner = THIS_MODULE, >> + .start = wd_start, >> + .stop = wd_stop, >> + .ping = wd_ping, >> + .set_timeout = wd_set_timeout, >> +}; >> + >> +static void wd_secondary_enable(u32 wdtmode) >> +{ >> + u16 resetbit; >> + >> + /* set safe_en_n so we are not just WDIOF_ALARMONLY */ >> + if (wdtmode == SIMATIC_IPC_DEVICE_227E) { >> + /* enable SAFE_EN_N on GP_STATUS_REG_227E */ >> + resetbit = inb(GP_STATUS_REG_227E); >> + outb(resetbit & ~SAFE_EN_N_227E, GP_STATUS_REG_227E); >> + } else { >> + /* enable SAFE_EN_N on PCH D1600 */ >> + resetbit = ioread16(wd_reset_base_addr); >> + iowrite16(resetbit & ~SAFE_EN_N_427E, wd_reset_base_addr); >> + } >> +} >> + >> +static int wd_setup(u32 wdtmode) >> +{ >> + unsigned int bootstatus = 0; >> + int timeout_idx; >> + >> + timeout_idx = find_closest(TIMEOUT_DEF, wd_timeout_table, >> + ARRAY_SIZE(wd_timeout_table)); >> + >> + if (inb(WD_ENABLE_IOADR) & WD_TRIGGERED) >> + bootstatus |= WDIOF_CARDRESET; >> + >> + /* reset alarm bit, set macro mode, and set timeout */ >> + outb(WD_TRIGGERED | WD_MACROMODE | timeout_idx << 3, WD_ENABLE_IOADR); >> + >> + wd_secondary_enable(wdtmode); >> + >> + return bootstatus; >> +} >> + >> +static struct watchdog_device wdd_data = { >> + .info = &wdt_ident, >> + .ops = &wdt_ops, >> + .min_timeout = TIMEOUT_MIN, >> + .max_timeout = TIMEOUT_MAX >> +}; >> + >> +static int simatic_ipc_wdt_probe(struct platform_device *pdev) >> +{ >> + struct simatic_ipc_platform *plat = pdev->dev.platform_data; >> + struct device *dev = &pdev->dev; >> + struct resource *res; >> + >> + switch (plat->devmode) { >> + case SIMATIC_IPC_DEVICE_227E: >> + if (!devm_request_region(dev, gp_status_reg_227e_res.start, >> + resource_size(&gp_status_reg_227e_res), >> + KBUILD_MODNAME)) { >> + dev_err(dev, >> + "Unable to register IO resource at %pR\n", >> + &gp_status_reg_227e_res); >> + return -EBUSY; >> + } >> + fallthrough; >> + case SIMATIC_IPC_DEVICE_427E: >> + wdd_data.parent = dev; >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + if (!devm_request_region(dev, io_resource_enable.start, >> + resource_size(&io_resource_enable), >> + io_resource_enable.name)) { >> + dev_err(dev, >> + "Unable to register IO resource at %#x\n", >> + WD_ENABLE_IOADR); >> + return -EBUSY; >> + } >> + >> + if (!devm_request_region(dev, io_resource_trigger.start, >> + resource_size(&io_resource_trigger), >> + io_resource_trigger.name)) { >> + dev_err(dev, >> + "Unable to register IO resource at %#x\n", >> + WD_TRIGGER_IOADR); >> + return -EBUSY; >> + } >> + >> + if (plat->devmode == SIMATIC_IPC_DEVICE_427E) { >> + res = &mem_resource; >> + >> + /* get GPIO base from PCI */ >> + res->start = simatic_ipc_get_membase0(PCI_DEVFN(0x1f, 1)); >> + if (res->start == 0) >> + return -ENODEV; >> + >> + /* do the final address calculation */ >> + res->start = res->start + (GPIO_COMMUNITY0_PORT_ID << 16) + >> + PAD_CFG_DW0_GPP_A_23; >> + res->end += res->start; >> + >> + wd_reset_base_addr = devm_ioremap_resource(dev, res); >> + if (IS_ERR(wd_reset_base_addr)) >> + return PTR_ERR(wd_reset_base_addr); >> + } >> + >> + wdd_data.bootstatus = wd_setup(plat->devmode); >> + if (wdd_data.bootstatus) >> + dev_warn(dev, "last reboot caused by watchdog reset\n"); >> + >> + watchdog_set_nowayout(&wdd_data, nowayout); >> + watchdog_stop_on_reboot(&wdd_data); >> + return devm_watchdog_register_device(dev, &wdd_data); >> +} >> + >> +static struct platform_driver simatic_ipc_wdt_driver = { >> + .probe = simatic_ipc_wdt_probe, >> + .driver = { >> + .name = KBUILD_MODNAME, >> + }, >> +}; >> + >> +module_platform_driver(simatic_ipc_wdt_driver); >> + >> +MODULE_LICENSE("GPL v2"); >> +MODULE_ALIAS("platform:" KBUILD_MODNAME); >> +MODULE_AUTHOR("Gerd Haeussler <gerd.haeussler.ext@siemens.com>"); >> >
| |