lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
Date
The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on
the BCM4908") added a second "default" line for ARCH_BCM_4908 above
the original "default" line for ARCH_BRCMSTB. When two "default"
lines are used, only the first is used and this change stopped
the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB.
The fix is to use one "default line with "||".

Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
drivers/phy/broadcom/Kconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index f81e23742079..849c4204f550 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -97,8 +97,7 @@ config PHY_BRCM_USB
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB if ARCH_BRCMSTB
- default ARCH_BCM4908
- default ARCH_BRCMSTB
+ default ARCH_BCM4908 || ARCH_BRCMSTB
help
Enable this to support the Broadcom STB USB PHY.
This driver is required by the USB XHCI, EHCI and OHCI
--
2.17.1
\
 
 \ /
  Last update: 2021-12-01 19:07    [W:0.245 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site