lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] TI K3 R5F and C71x support on J721S2
On Mon, Nov 22, 2021 at 06:27:22AM -0600, Hari Nagalla wrote:
> Hi All,
>
> The following series enhances the K3 R5F and DSP remoteproc drivers to
> add support for the R5F clusters and C71x DSP on the newer TI K3 J721S2
> SoC family. The J721S2 SoCs have 3 R5FSS clusters, one in MCU voltage
> domain and the other two in MAIN voltage domain. There are also 2 C71x
> DSP subsystems in MAIN voltage domain. The R5FSS is similar to the R5FSS
> in J7200 SoCs, while the C71x DSPs are similar to the C71x DSP on J721e
> SoCs.
>
> See J721S2 Technical Reference Manual (SPRUJ28 – NOVEMBER 2021)
> for further details: http://www.ti.com/lit/pdf/spruj28
>
> Regards
> Hari
>
> Hari Nagalla (4):
> dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs
> dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs
> remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs
> remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs
>
> .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 3 +++
> .../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml | 8 +++++---
> drivers/remoteproc/ti_k3_dsp_remoteproc.c | 1 +
> drivers/remoteproc/ti_k3_r5_remoteproc.c | 5 +++--
> 4 files changed, 12 insertions(+), 5 deletions(-)

I have applied this set.

Thanks,
Mathieu

>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2021-12-01 17:56    [W:0.086 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site