lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] phy: qcom-qmp: Add SM8450 UFS QMP Phy
Date
SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence
from SM8450. Add the new clock list for this phy and the new compatible

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 32 +++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 456a59d8c7d0..a959c97a699f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3091,6 +3091,10 @@ static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
"aux", "ref_clk_src", "com_aux"
};

+static const char * const sm8450_ufs_phy_clk_l[] = {
+ "qref", "ref", "ref_aux",
+};
+
static const char * const sdm845_ufs_phy_clk_l[] = {
"ref", "ref_aux",
};
@@ -4087,6 +4091,31 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};

+static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 2,
+
+ .serdes_tbl = sm8350_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
+ .tx_tbl = sm8350_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
+ .rx_tbl = sm8350_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
+ .pcs_tbl = sm8350_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8150_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -5745,6 +5774,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
.data = &sm8350_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8450-qmp-ufs-phy",
+ .data = &sm8450_ufsphy_cfg,
}, {
.compatible = "qcom,qcm2290-qmp-usb3-phy",
.data = &qcm2290_usb3phy_cfg,
--
2.31.1
\
 
 \ /
  Last update: 2021-12-01 08:46    [W:0.085 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site