lkml.org 
[lkml]   [2021]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] Input: elantech - Fix stack out of bound access in elantech_change_report_id()
On Tue, Nov 16, 2021 at 10:55:58AM +0100, Andrea Righi wrote:
> The array param[] in elantech_change_report_id() must be at least 3
> bytes, because elantech_read_reg_params() is calling ps2_command() with
> PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but
> it's defined in the stack as an array of 2 bytes, therefore we have a
> potential stack out-of-bounds access here, also confirmed by KASAN:
>
> [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0
> [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118
>
> [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110
> [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020
> [ 6.512436] Workqueue: events_long serio_handle_event
> [ 6.512453] Call Trace:
> [ 6.512462] show_stack+0x52/0x58
> [ 6.512474] dump_stack+0xa1/0xd3
> [ 6.512487] print_address_description.constprop.0+0x1d/0x140
> [ 6.512502] ? __ps2_command+0x372/0x7e0
> [ 6.512516] __kasan_report.cold+0x7d/0x112
> [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0
> [ 6.512539] ? __ps2_command+0x372/0x7e0
> [ 6.512552] kasan_report+0x3c/0x50
> [ 6.512564] __asan_load1+0x6a/0x70
> [ 6.512575] __ps2_command+0x372/0x7e0
> [ 6.512589] ? ps2_drain+0x240/0x240
> [ 6.512601] ? dev_printk_emit+0xa2/0xd3
> [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5
> [ 6.512621] ? __kasan_check_write+0x14/0x20
> [ 6.512634] ? mutex_lock+0x8f/0xe0
> [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20
> [ 6.512655] ps2_command+0x52/0x90
> [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse]
> [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse]
> [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse]
> [ 6.512863] ? ps2_command+0x7f/0x90
> [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse]
> [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse]
> [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse]
> [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse]
> [ 6.513122] ? phys_pmd_init+0x30e/0x521
> [ 6.513137] elantech_init+0x8a/0x200 [psmouse]
> [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse]
> [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse]
> [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse]
> [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse]
> [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse]
> [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse]
> [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse]
> [ 6.513519] ? mutex_unlock+0x22/0x40
> [ 6.513526] ? ps2_command+0x7f/0x90
> [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse]
> [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse]
> [ 6.513624] psmouse_connect+0x272/0x530 [psmouse]
> [ 6.513669] serio_driver_probe+0x55/0x70
> [ 6.513679] really_probe+0x190/0x720
> [ 6.513689] driver_probe_device+0x160/0x1f0
> [ 6.513697] device_driver_attach+0x119/0x130
> [ 6.513705] ? device_driver_attach+0x130/0x130
> [ 6.513713] __driver_attach+0xe7/0x1a0
> [ 6.513720] ? device_driver_attach+0x130/0x130
> [ 6.513728] bus_for_each_dev+0xfb/0x150
> [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10
> [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30
> [ 6.513757] driver_attach+0x2d/0x40
> [ 6.513764] serio_handle_event+0x199/0x3d0
> [ 6.513775] process_one_work+0x471/0x740
> [ 6.513785] worker_thread+0x2d2/0x790
> [ 6.513794] ? process_one_work+0x740/0x740
> [ 6.513802] kthread+0x1b4/0x1e0
> [ 6.513809] ? set_kthread_struct+0x80/0x80
> [ 6.513816] ret_from_fork+0x22/0x30
>
> [ 6.513832] The buggy address belongs to the page:
> [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7
> [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
> [ 6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
> [ 6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
> [ 6.513872] page dumped because: kasan: bad access detected
>
> [ 6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame:
> [ 6.513887] elantech_change_report_id+0x0/0x256 [psmouse]
>
> [ 6.513941] this frame has 1 object:
> [ 6.513947] [32, 34) 'param'
>
> [ 6.513956] Memory state around the buggy address:
> [ 6.513962] ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00
> [ 6.513969] ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00
> [ 6.513982] ^
> [ 6.513988] ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 6.513995] ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00
> [ 6.514000] ==================================================================
>
> Define param[] in elantech_change_report_id() as an array of 3 bytes to
> prevent the out-of-bounds access in the stack.
>
> Fixes: e4c9062717fe ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode")
> BugLink: https://bugs.launchpad.net/bugs/1945590
> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>

Applied, thank you.

--
Dmitry

\
 
 \ /
  Last update: 2021-11-29 09:11    [W:0.049 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site