lkml.org 
[lkml]   [2021]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Re: [PATCH v2] ARM: dts: sun8i: Adjust power key nodes
On Tue, Nov 30, 2021 at 1:29 AM Jernej Škrabec <jernej.skrabec@gmail.com> wrote:
>
> Dne ponedeljek, 29. november 2021 ob 18:16:31 CET je Chen-Yu Tsai napisal(a):
> > On Tue, Nov 30, 2021 at 12:55 AM Jernej Skrabec
> > <jernej.skrabec@gmail.com> wrote:
> > >
> > > Several H3 and one H2+ board have power key nodes, which are slightly
> > > off. Some are missing wakeup-source property and some have BTN_0 code
> > > assigned instead of KEY_POWER.
> >
> > It might have been that after shutdown there was really no way to
> > "power on" the board with these GPIO power keys, so we didn't use
> > KEY_POWER for them?
>
> KEY_POWER is actually processed by userspace, so it would still make sense to
> power down board if power key is pressed. Correct me if I'm wrong, but in
> combination with wfi it could work before SCP FW was available?

I guess it could? But where would it do wfi, and what would execute
after wfi?

IIRC the kernel's halt sequence doesn't really clean up interrupts,
so wfi isn't going to get very far.

> >
> > > Adjust them, so they can function as intended by designer.
> > >
> > > Co-developed-by: Michael Klein <michael@fossekall.de>
> > > Signed-off-by: Michael Klein <michael@fossekall.de>
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> >
> > Acked-by: Chen-Yu Tsai <wens@csie.org>
> >
>
> Thanks!
>
> Best regards,
> Jernej
>
>

\
 
 \ /
  Last update: 2021-11-29 18:38    [W:0.100 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site