lkml.org 
[lkml]   [2021]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [RFC 0/5] arm64: imx8mm: Enable Hantro VPUs
    On Mon, Nov 29, 2021 at 1:36 PM Tim Harvey <tharvey@gateworks.com> wrote:
    >
    > On Mon, Nov 29, 2021 at 10:59 AM Adam Ford <aford173@gmail.com> wrote:
    > >
    > > On Mon, Nov 29, 2021 at 10:54 AM Ezequiel Garcia
    > > <ezequiel@vanguardiasur.com.ar> wrote:
    > > >
    > > > On Mon, 29 Nov 2021 at 13:48, Adam Ford <aford173@gmail.com> wrote:
    > > > >
    > > > > On Tue, Nov 23, 2021 at 2:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote:
    > > > > >
    > > > > > Le lundi 22 novembre 2021 à 09:25 -0800, Tim Harvey a écrit :
    > > > > > > On Sat, Nov 20, 2021 at 7:36 AM Adam Ford <aford173@gmail.com> wrote:
    > > > > > > >
    > > > > > > > On Fri, Nov 19, 2021 at 5:37 PM Adam Ford <aford173@gmail.com> wrote:
    > > > > > > > >
    > > > > > > > > On Fri, Nov 19, 2021 at 10:29 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote:
    > > > > > > > > >
    > > > > > > > > > Hi Adam, Tim,
    > > > > > > > > >
    > > > > > > > > > [...]
    > > > > > > > > > > > > > Nicolas and Adam,
    > > > > > > > > > > > > >
    > > > > > > > > > > > > > For the H1 patches in this series: I've been able to test the IMX8MM
    > > > > > > > > > > > > > H1 JPEG encode using GStreamer 1.18.5:
    > > > > > > > > > > > > > $ gst-inspect-1.0 | grep -e "v4l2.*enc"
    > > > > > > > > > > > > > video4linux2: v4l2jpegenc: V4L2 JPEG Encoder
    > > > > > > > > > > > > > $ gst-launch-1.0 videotestsrc ! jpegenc ! rtpjpegpay ! udpsink
    > > > > > > > > > > > > ^ v4l2jpegenc
    > > > > > > > > > > > >
    > > > > > > > > > > > > This is just a transcript error ?
    > > > > > > > > > > >
    > > > > > > > > > > > Nicolas,
    > > > > > > > > > > >
    > > > > > > > > > > > No! Thanks for catching my mistake. I was testing with software encode... ooops!
    > > > > > > > > > > >
    > > > > > > > > > > > 'gst-launch-1.0 videotestsrc ! v4l2jpegenc ! fakesink' actually hangs
    > > > > > > > > > > > the board so likely a power-domain issue there?
    > > > > > > > > > >
    > > > > > > > > > > The v4l2-compliance tests fail on the h1 decoder with a hang, but I
    > > > > > > > > > > think we're writing to registers which are not documented in the Mini
    > > > > > > > > > > TRM. The Mini TRM doesn't explicitly show the JPEG encoding as a
    > > > > > > > > > > feature, but some of the registers state JPEG, but because some of the
    > > > > > > > > > > registers written for the H1 are not documented in the TRM. If those
    > > > > > > > > > > registers are restricted or not in this SoC, I am concerned that it
    > > > > > > > > > > might be related. I'll try to run some more tests this weekend to
    > > > > > > > > > > check on the status of the power-domain stuff.
    > > > > > > > > >
    > > > > > > > > > To verify if the HW support JPEG encoding you can read SWREG63 bit 25. This is
    > > > > > > > > > in the TRM, just not labelled properly. To mimic the decoding side, would be "HW
    > > > > > > > > > synthesis config register X" with the bit labelled SW_ENC_JPEG_PROF (but
    > > > > > > > > > PROF/profile is on or off). If your board hang while reading this, you likely
    > > > > > > > > > didn't get the power bit right.
    > > > > > > > > >
    > > > > > > > > > IMX8 has an undocumented control block thing that we have been fighting with in
    > > > > > > > > > imx8q, perhaps that's your issue. Few driver was proposed, we are still pending
    > > > > > > > > > on NXP solution to be submitted (they asked us to wait, still waiting =)).
    > > > > > > > >
    > > > > > > > > Nicolas,
    > > > > > > > >
    > > > > > > > > Thanks for the suggestion to read offset FC. There was an attempt
    > > > > > > > > made by Lucas Stach to develop a VPU blk-ctrl driver to coordinate the
    > > > > > > > > power-domains with the GPC driver. Unfortunately, it does appear to
    > > > > > > > > hang, so it might not be operating correctly.
    > > > > > > > >
    > > > > > > > > Lucas,
    > > > > > > > >
    > > > > > > > > Do you have any idea of stuff I can try to see if the power domain is
    > > > > > > > > coming online correctly?
    > > > > > > > >
    > > > > > > > > [ 10.434727] imx-pgc imx-pgc-domain.6: request the vpumix domain to power up
    > > > > > > > > [ 10.463647] imx-pgc imx-pgc-domain.6: request the vpumix ADB400 to power up
    > > > > > > > > [ 10.517155] imx-pgc imx-pgc-domain.6: genpd vpumix success
    > > > > > > > > [ 10.728927] vpu: set fuse bits to enable
    > > > > > > > > [ 10.825500] imx8m-blk-ctrl 38330000.blk-ctrl: power vpublk-g1 GPC domain
    > > > > > > > > [ 10.878986] imx-pgc imx-pgc-domain.7: request the vpu-g1 domain to power up
    > > > > > > > > [ 10.932429] imx-pgc imx-pgc-domain.7: genpd vpu-g1 success
    > > > > > > > > [ 10.971988] imx8m-blk-ctrl 38330000.blk-ctrl: genpd vpublk-g1 success
    > > > > > > > > [ 11.004726] hantro-vpu 38300000.video-codec: registered
    > > > > > > > > nxp,imx8mm-vpu-dec as /dev/video0
    > > > > > > > > [ 11.040760] imx8m-blk-ctrl 38330000.blk-ctrl: power vpublk-g2 GPC domain
    > > > > > > > > [ 11.066181] imx-pgc imx-pgc-domain.8: request the vpu-g2 domain to power up
    > > > > > > > > [ 11.087887] imx-pgc imx-pgc-domain.8: genpd vpu-g2 success
    > > > > > > > > [ 11.113808] imx8m-blk-ctrl 38330000.blk-ctrl: genpd vpublk-g2 success
    > > > > > > > > [ 11.139634] hantro-vpu 38310000.video-codec: registered
    > > > > > > > > nxp,imx8mm-vpu-g2-dec as /dev/video1
    > > > > > > > > [ 11.156463] imx8m-blk-ctrl 38330000.blk-ctrl: power vpublk-h1 GPC domain
    > > > > > > > > [ 11.170817] imx-pgc imx-pgc-domain.9: request the vpu-h1 domain to power up
    > > > > > > > > [ 11.232990] imx-pgc imx-pgc-domain.9: genpd vpu-h1 success
    > > > > > > > > [ 11.252546] imx8m-blk-ctrl 38330000.blk-ctrl: genpd vpublk-h1 success
    > > > > > > > > [ 11.266152] hantro-vpu 38320000.video-codec: Checking vpu->enc_base + 0xfc
    > > > > > > > >
    > > > > > > > > <hang>
    > > > > > > > >
    > > > > > > > > adam
    > > > > > > > >
    > > > > > > >
    > > > > > > > Nicolas, Tim, and Lucas,
    > > > > > > >
    > > > > > > > I think I have the hanging resolved in the power domains, and I'll be
    > > > > > > > pushing the fix to the GPCv2.
    > > > > > > >
    > > > > > > > For the H1 Encoder, I added some debugging code to read the offset
    > > > > > > > 0xfc and print some data based on the findings of that VPU-h1 offset.
    > > > > > > > I basically check the various bits per the TRM to see if they are set
    > > > > > > > and print some splat to indicate whether or not the function is
    > > > > > > > supported.
    > > > > > > >
    > > > > > > > [ 8.861865] hantro-vpu 38320000.video-codec: Checking vpu->enc_base + 0xfc
    > > > > > > > [ 8.870594] hantro-vpu 38320000.video-codec: Stabilization supported by HW
    > > > > > > > [ 8.889341] hantro-vpu 38320000.video-codec: VP8 encoding supported by HW
    > > > > > > > [ 8.899386] hantro-vpu 38320000.video-codec: H.264 encoding supported by HW
    > > > > > > > [ 8.918171] hantro-vpu 38320000.video-codec: RGB to YUV conversion
    > > > > > > > supported by HW
    > > > > > > > [ 8.934067] hantro-vpu 38320000.video-codec: registered
    > > > > > > > nxp,imx8mm-vpu-h1-enc as /dev/video2
    > > > > > > >
    > > > > > > > Unfortunately, JPEG is not listed as supported. :-(
    > > > > > >
    > > > > > > Adam,
    > > > > > >
    > > > > > > Well not having JPEG encode support is unfortunate, and unexpected. Do
    > > > > > > we not have hantro support yet for VP8/H264 encode?
    > > > > >
    > > > > > There is no mainline support yet. You can derive from RK3288 support using Google ChromeOS method (a v4l2 plugins that simulate in userspace a stateful encoder):
    > > > > >
    > > > > > - libv4l plugins / https://chromium.googlesource.com/chromiumos/third_party/libv4lplugins/+/refs/heads/master
    > > > > > - Kernel Driver / https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/media/platform/rockchip-vpu/
    > > > > >
    > > > > > >
    > > > > > > I haven't quite figured out how to build a modern mono-repo gstreamer
    > > > > > > on the ubuntu 20.04 rootfs I'm using so I haven't been able to test
    > > > > > > VPU encode/decode properly. I'll keep working on it when I'm back in
    > > > > > > the office the following week.
    > > > > >
    > > > > > Did a quick test to make sure there isn't any ubuntu specific blockers, here's a
    > > > > > dirty script that produce a minimal GStreamer, there was really nothing special
    > > > > > compare to other meson projects. Note that I use --wrap-mode=nofallback to avoid
    > > > > > letting GStreamer complete it's feature-set by downloading the planet. This
    > > > > > already build quite a lot and could likely be made smaller by avoid plugins-good
    > > > > > build-dep call, but then you need to check for v4l2odecs and video4linux devs
    > > > > > (mostly gudev a glib udev binding).
    > > > > >
    > > > > > # Install ubuntu
    > > > > > podman run -it --rm ubuntu:20.04
    > > > > > sed -i "s/# deb-src/deb-src/" /etc/apt/sources.list
    > > > > > apt update
    > > > > > apt build-dep gstreamer1.0-plugins-good
    > > > > > apt install git python3-pip flex bison
    > > > > >
    > > > > > # Need a newer meson
    > > > > > pip3 install --user meson
    > > > > > export PATH=$PATH:~/.local/bin
    > > > > >
    > > > > > # Build GStreamer
    > > > > > git clone https://gitlab.freedesktop.org/gstreamer/gstreamer.git
    > > > > > cd gstreamer
    > > > > > meson setup build --wrap-mode=nofallback
    > > > > > ninja -C build
    > > > > >
    > > > > > # Run in-place
    > > > > > ./gst-env.py
    > > > > > gst-inspect-1.0 v4l2codecs
    > > > > > gst-inspect 1.0 video4linux2
    > > > > >
    > > > > Thanks for the suggestions.
    > > > >
    > > > > I downloaded what's in the master repo:
    > > > >
    > > > > [gst-main] root@localhost:~/gstreamer# gst-inspect-1.0 v4l2codecs
    > > > >
    > > > > ** (gst-plugin-scanner:7317): CRITICAL **: 10:29:51.847: can't find
    > > > > gi.repository.Gst
    > > > > Plugin Details:
    > > > > Name v4l2codecs
    > > > > Description V4L2 CODEC Accelerators plugin
    > > > > Filename
    > > > > /root/gstreamer/builddir/subprojects/gst-plugins-bad/sys/v4l2codecs/libgstv4l2codecs.so
    > > > > Version 1.19.3.1
    > > > > License LGPL
    > > > > Source module gst-plugins-bad
    > > > > Binary package GStreamer Bad Plug-ins git
    > > > > Origin URL Unknown package origin
    > > > >
    > > > > v4l2slh264dec: V4L2 Stateless H.264 Video Decoder
    > > > > v4l2slmpeg2dec: V4L2 Stateless Mpeg2 Video Decoder
    > > > > v4l2slvp8alphadecodebin: VP8 Alpha Decoder
    > > > > v4l2slvp8dec: V4L2 Stateless VP8 Video Decoder
    > > > >
    > > > > 4 features:
    > > > > +-- 4 elements
    > > > >
    > > > > [gst-main] root@localhost:~/gstreamer# gst-inspect-1.0 video4linux2
    > > > > Plugin Details:
    > > > > Name video4linux2
    > > > > Description elements for Video 4 Linux
    > > > > Filename
    > > > > /root/gstreamer/builddir/subprojects/gst-plugins-good/sys/v4l2/libgstvideo4linux2.so
    > > > > Version 1.19.3.1
    > > > > License LGPL
    > > > > Source module gst-plugins-good
    > > > > Binary package GStreamer Good Plug-ins git
    > > > > Origin URL Unknown package origin
    > > > >
    > > > > v4l2deviceprovider: Video (video4linux2) Device Provider
    > > > > v4l2jpegenc: V4L2 JPEG Encoder
    > > > > v4l2radio: Radio (video4linux2) Tuner
    > > > > v4l2sink: Video (video4linux2) Sink
    > > > > v4l2src: Video (video4linux2) Source
    > > > >
    > > > > 5 features:
    > > > > +-- 4 elements
    > > > > +-- 1 device providers
    > > > >
    > > > > I still have the H1 encoder enabled, but I know JPEG isn't supported,
    > > > > so I'm going to attempt to do some decoding and pipe to fakesink since
    > > > > I don't have a functional display yet.
    > > > >
    > > > > gst-launch-1.0 -ev filesrc location=trailer_1080p_h264_mp3.avi !
    > > > > decodebin3 ! fakesink
    > > > >
    > > > > Redistribute latency...
    > > > > /GstPipeline:pipeline0/GstDecodebin3:decodebin3-0/v4l2slh264dec:v4l2slh264dec0.GstPad:src:
    > > > > caps = video/x-raw, format=(string)NV12, width=(int)1920,
    > > > > height=(int)1080, interlace-mode=(string)progressive,
    > > > > multiview-mode=(string)mono,
    > > > > multiview-flags=(GstVideoMultiviewFlagsSet)0:ffffffff:/right-view-first/left-flipped/left-flopped/right-flipped/right-flopped/half-aspect/mixed-mono,
    > > > > pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)25/1
    > > > > /GstPipeline:pipeline0/GstDecodebin3:decodebin3-0.GstGhostPad:video_0:
    > > > > caps = video/x-raw, format=(string)NV12, width=(int)1920,
    > > > > height=(int)1080, interlace-mode=(string)progressive,
    > > > > multiview-mode=(string)mono,
    > > > > multiview-flags=(GstVideoMultiviewFlagsSet)0:ffffffff:/right-view-first/left-flipped/left-flopped/right-flipped/right-flopped/half-aspect/mixed-mono,
    > > > > pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)25/1
    > > > > /GstPipeline:pipeline0/GstDecodebin3:decodebin3-0.GstGhostPad:video_0.GstProxyPad:proxypad6:
    > > > > caps = video/x-raw, format=(string)NV12, width=(int)1920,
    > > > > height=(int)1080, interlace-mode=(string)progressive,
    > > > > multiview-mode=(string)mono,
    > > > > multiview-flags=(GstVideoMultiviewFlagsSet)0:ffffffff:/right-view-first/left-flipped/left-flopped/right-flipped/right-flopped/half-aspect/mixed-mono,
    > > > > pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)25/1
    > > > > /GstPipeline:pipeline0/GstDecodebin3:decodebin3-0/GstMultiQueue:multiqueue0:
    > > > > min-interleave-time = 300000000
    > > > > Redistribute latency...
    > > > > /GstPipeline:pipeline0/GstDecodebin3:decodebin3-0/v4l2slh264dec:v4l2slh264dec0.GstPad:sink:
    > > > > caps = video/x-h264, variant=(string)itu, framerate=(fraction)25/1,
    > > > > width=(int)1920, height=(int)1080, chroma-format=(string)4:2:0,
    > > > > bit-depth-luma=(uint)8, bit-depth-chroma=(uint)8,
    > > > > parsed=(boolean)true, stream-format=(string)avc, alignment=(string)au,
    > > > > profile=(string)high, level=(string)4,
    > > > > codec_data=(buffer)01640028ffe1001a67640028acd940780227e584000003000400000300c83c60c65801000668ebe3cb22c0
    > > > > New clock: GstSystemClock
    > > > >
    > > > > And it appears to stream, because the counter increases. I haven't
    > > > > checked the CPU utilization, but the fact that it shows v4l2slh264dec
    > > > > is good.
    > > > >
    > > > > Is there a way to know if/how the decoder is using the proper VPU? I
    > > > > assume if it wasn't using the proper one, it would fail, but was just
    > > > > curious.
    > > > >
    > > >
    > > > A few ways. You can check /proc/interrupts, which should have
    > > > VPU activity.
    > > >
    > > > Or enable debug messages for the module,
    > > > using the debug hantro parameter. V4L2 has debug messages
    > > > that you can enable, see /sys/class/video4linux/video0/dev_debug.
    > > >
    > > > Instead of fakesink you can output to pngenc/jpegenc and check the output
    > > > is visually correct. If at all possible, the proper way is to use Fluster,
    > > > and report the score you get:
    > > >
    > > > https://github.com/fluendo/fluster
    > > >
    > >
    > > I ran fluster on the VP8 decoder, but only 55/61 passed.
    > >
    > > ****************************************************************************************************
    > > Running test suite VP8-TEST-VECTORS with decoder GStreamer-VP8-V4L2SL-Gst1.0
    > > Using 4 parallel job(s)
    > > ****************************************************************************************************
    > >
    > > [TEST SUITE ] (DECODER ) TEST VECTOR
    > > ... RESULT
    > > ----------------------------------------------------------------------
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-004 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-001 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-002 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-003 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-005 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-006 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-007 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-008 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-011 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-009 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-012 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-013 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-014 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-010 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-016 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-017 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-018 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-01-intra-1400
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-01-intra-1416
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-01-intra-1417
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-01-intra-1411
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-02-inter-1402
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-02-inter-1412
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-02-inter-1424
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-01 ... Fail
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-02 ... Fail
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-03 ... Fail
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-04 ... Fail
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1401 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0) vp80-02-inter-1418
    > > ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1403 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1407 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1408 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1409 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1413 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1415 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1425 ... Fail
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1426 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1427 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1432 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1435 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1436 ... Fail
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-00-comprehensive-015 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1441 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1437 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-04-partitions-1404 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1442 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-04-partitions-1405 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-04-partitions-1406 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1428 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1429 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1431 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1410 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-03-segmentation-1414 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1430 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1433 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1438 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1434 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1439 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1440 ... Success
    > > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2SL-Gst1.0)
    > > vp80-05-sharpness-1443 ... Success
    > >
    > >
    > > =======================================================================
    > > FAIL: vp80-03-segmentation-01 (GStreamer-VP8-V4L2SL-Gst1.0.VP8-TEST-VECTORS)
    > > ----------------------------------------------------------------------
    > > Traceback (most recent call last):
    > > File "/root/gstreamer/fluster/fluster/test.py", line 104, in _test
    > > self.assertEqual(
    > > AssertionError: 'db954c077b7a3f34a448ceaacf8f525c' !=
    > > '8bbb396a9bdf8afa250d3b2e45e6b367'
    > > - db954c077b7a3f34a448ceaacf8f525c
    > > + 8bbb396a9bdf8afa250d3b2e45e6b367
    > > : vp80-03-segmentation-01
    > >
    > > =======================================================================
    > > FAIL: vp80-03-segmentation-02 (GStreamer-VP8-V4L2SL-Gst1.0.VP8-TEST-VECTORS)
    > > ----------------------------------------------------------------------
    > > Traceback (most recent call last):
    > > File "/root/gstreamer/fluster/fluster/test.py", line 104, in _test
    > > self.assertEqual(
    > > AssertionError: '4d2d65efeee1c83772c33a13446bd1a4' !=
    > > '1b2061d4a74549228769f8e292bcb15f'
    > > - 4d2d65efeee1c83772c33a13446bd1a4
    > > + 1b2061d4a74549228769f8e292bcb15f
    > > : vp80-03-segmentation-02
    > >
    > > =======================================================================
    > > FAIL: vp80-03-segmentation-03 (GStreamer-VP8-V4L2SL-Gst1.0.VP8-TEST-VECTORS)
    > > ----------------------------------------------------------------------
    > > Traceback (most recent call last):
    > > File "/root/gstreamer/fluster/fluster/test.py", line 104, in _test
    > > self.assertEqual(
    > > AssertionError: '73d864433691f8db43257b88495ac8c3' !=
    > > 'fd1eb6ebd7100995bad11042a9bea048'
    > > - 73d864433691f8db43257b88495ac8c3
    > > + fd1eb6ebd7100995bad11042a9bea048
    > > : vp80-03-segmentation-03
    > >
    > > =======================================================================
    > > FAIL: vp80-03-segmentation-04 (GStreamer-VP8-V4L2SL-Gst1.0.VP8-TEST-VECTORS)
    > > ----------------------------------------------------------------------
    > > Traceback (most recent call last):
    > > File "/root/gstreamer/fluster/fluster/test.py", line 104, in _test
    > > self.assertEqual(
    > > AssertionError: '7f846c8bd7cdfe61f8542f382f9d8eeb' !=
    > > '0c27a47c4fd8bbfce173d005bef8be6a'
    > > - 7f846c8bd7cdfe61f8542f382f9d8eeb
    > > + 0c27a47c4fd8bbfce173d005bef8be6a
    > > : vp80-03-segmentation-04
    > >
    > > =======================================================================
    > > FAIL: vp80-03-segmentation-1425 (GStreamer-VP8-V4L2SL-Gst1.0.VP8-TEST-VECTORS)
    > > ----------------------------------------------------------------------
    > > Traceback (most recent call last):
    > > File "/root/gstreamer/fluster/fluster/test.py", line 104, in _test
    > > self.assertEqual(
    > > AssertionError: '96ffacf0c3eae59b58252be24a60e9b2' !=
    > > '83e8a322e8ab23e60ba16430aacad827'
    > > - 96ffacf0c3eae59b58252be24a60e9b2
    > > + 83e8a322e8ab23e60ba16430aacad827
    > > : vp80-03-segmentation-1425
    > >
    > > =======================================================================
    > > FAIL: vp80-03-segmentation-1436 (GStreamer-VP8-V4L2SL-Gst1.0.VP8-TEST-VECTORS)
    > > ----------------------------------------------------------------------
    > > Traceback (most recent call last):
    > > File "/root/gstreamer/fluster/fluster/test.py", line 104, in _test
    > > self.assertEqual(
    > > AssertionError: 'bfd17a557ee1ba347c755a18ce5a64a6' !=
    > > '5bca61a733c1936205f82de1492a1b2b'
    > > - bfd17a557ee1ba347c755a18ce5a64a6
    > > + 5bca61a733c1936205f82de1492a1b2b
    > > : vp80-03-segmentation-1436
    > >
    > > Ran 55/61 tests successfully in 12.104 secs
    > >
    > > I am not that familiar with this tool, but I assume failures are bad.
    > > However these look like Python errors and not gst errors.
    > >
    > > The H264 decoder resulted in:
    > >
    > > Ran 85/135 tests successfully in 57.821 secs
    > >
    > > I can provide the splat if you want. Those looked like gst errors,
    > > because most of the error messages state the gst-launch-1.0 returned
    > > non-zero exit status 1.
    > >
    > >
    > > > It should be easy to use.
    > >
    > > It was.
    > > >
    > > > > I think I'll redo the patch without the RFC and without the H1 encoder
    > > > > unless anyone has any objections. I know I need to rebase on
    > > > > linux-next anyway because the patches don't apply cleanly. Is there a
    > > > > specific branch I should use? I don't know if this goes through
    > > > > Shawn's IMX tree or the media tree (or a combination)
    > > > >
    > > >
    > > > You should rebase on media's master branch:

    > > >
    > > > https://git.linuxtv.org/media_tree.git/log/
    > >
    > > I'll submit the patch with a cover letter with the results of the VP8
    > > and H264 fluster test in the cover letter. Is there a stateless
    > > decoder for the VP9 decoder? gst-inspect only shows the following
    > > v4l2codecs.
    > >
    > > v4l2slh264dec: V4L2 Stateless H.264 Video Decoder
    > > v4l2slmpeg2dec: V4L2 Stateless Mpeg2 Video Decoder
    > > v4l2slvp8alphadecodebin: VP8 Alpha Decoder
    > > v4l2slvp8dec: V4L2 Stateless VP8 Video Decoder
    > >
    > > thanks for all your help. Hopefully we can get this integrated soon.
    > >
    >
    > Adam,
    >
    > What deps did you install in order to get v4l2codecs building? I
    > installed libgudev-1.0-dev based on Nicolas' suggestion and rebuilt
    > (not sure if I needed to re-configure somehow) but there is still
    > nothing in build/subprojects/gst-plugins-bad/sys/v4l2codecs/. A 'meson
    > configure' tells me that v4l2codecs is set to 'auto' but I'm not sure
    > how to find out what dependencies are needed or what may be missing.

    Instead of building just a limited release of gstreamer, I had to
    build the whole thing.

    meson builddir
    ninja -C builddir -j2

    running with -j4 ran the imx8mm out of memory and slowed to a crawl to
    the point where it didn't finish even after building overnight.

    With that, I was able to execute gst-env.py to run streamer without
    installing it. In that environment, I was able to run fluster to get
    the results I published.

    adam
    >
    > Best regards,
    >
    > Tim

    \
     
     \ /
      Last update: 2021-11-29 23:38    [W:3.086 / U:0.080 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site