lkml.org 
[lkml]   [2021]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
From
Hi,

On 11/26/21 00:39, Laurent Pinchart wrote:
> Hi Hans,
>
> Thank you for the patch.
>
> On Thu, Nov 25, 2021 at 05:54:04PM +0100, Hans de Goede wrote:
>> From: Daniel Scally <djrscally@gmail.com>
>>
>> The TPS68470 PMIC has an I2C passthrough mode through which I2C traffic
>> can be forwarded to a device connected to the PMIC as though it were
>> connected directly to the system bus. Enable this mode when the chip
>> is initialised.
>
> Is there any drawback doing this unconditionally, if nothing is
> connected to the bus on the other side (including no pull-ups) ?

I actually never took a really close look at this patch, I just
sorta inherited it from Daniel.

Now that I have taken a close look, I see that it is setting the
exact same bits as which get set when enabling the VSIO regulator.

The idea here is that the I2C-passthrough only gets enabled when
the VSIO regulator is turned on, because some sensors end up
shorting the I2C pins to ground when the sensor is not powered.

Since we set these bits when powering up the VSIO regulator
and since we do that before trying to talk to the sensor
I don't think that we need this (hack) anymore.

I will give things a try without this change and if things
still work I will drop this patch from the set.

Daniel, what do you think?

Regards,

Hans






>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Signed-off-by: Daniel Scally <djrscally@gmail.com>
>> ---
>> .../x86/intel/int3472/intel_skl_int3472_tps68470.c | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c b/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c
>> index c05b4cf502fe..42e688f4cad4 100644
>> --- a/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c
>> +++ b/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c
>> @@ -45,6 +45,13 @@ static int tps68470_chip_init(struct device *dev, struct regmap *regmap)
>> return ret;
>> }
>>
>> + /* Enable I2C daisy chain */
>> + ret = regmap_write(regmap, TPS68470_REG_S_I2C_CTL, 0x03);
>> + if (ret) {
>> + dev_err(dev, "Failed to enable i2c daisy chain\n");
>> + return ret;
>> + }
>> +
>> dev_info(dev, "TPS68470 REVID: 0x%02x\n", version);
>>
>> return 0;
>

\
 
 \ /
  Last update: 2021-11-26 12:34    [W:0.081 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site