lkml.org 
[lkml]   [2021]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4] i2c: tegra: Add the ACPI support
On Thu, Nov 25, 2021 at 6:54 PM Akhil R <akhilrajeev@nvidia.com> wrote:
>
> Add support for the ACPI based device registration so that the driver
> can be also enabled through ACPI table.
>
> This does not include the ACPI support for Tegra VI and DVC I2C.

Thanks for an update, my comments below.

...

> - err = reset_control_reset(i2c_dev->rst);
> + if (handle)

> + err = acpi_evaluate_object(handle, "_RST", NULL, NULL);

Does it compile for CONFIG_ACPI=n case?

> + else
> + err = reset_control_reset(i2c_dev->rst);

If not, you will need something like this instead:

#ifdef CONFIG_ACPI
err = acpi_evaluate_object(ACPI_HANDLE(...), "_RST", NULL, NULL);
#else
err = reset_control_reset(i2c_dev->rst);
#endif

...

> + err = device_property_read_u32(i2c_dev->dev, "clock-frequency",
> + &i2c_dev->bus_clk_rate);
> if (err)
> i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;

Actually you need to switch to use i2c_timings data structure and
corresponding methods.
This change will be incorporated there. I.o.w. do it as a prerequisite
to this patch.

...

> + if (ACPI_HANDLE(i2c_dev->dev))
> + return 0;

With above mentioned ifdeffery this may be converted back to
has_acpi_companion() which is slightly better in this case.

> + if (ACPI_HANDLE(i2c_dev->dev))
> + return 0;

Ditto.

P.S> Sorry if I missed something in the previous reviews.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-11-25 20:32    [W:0.330 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site