lkml.org 
[lkml]   [2021]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 10/15] platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
Date
Pass tps68470_clk_platform_data to the tps68470-clk MFD-cell,
so that sensors which use the TPS68470 can find their clock.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v5:
- Add TPS68470_WIN_MFD_CELL_COUNT define

Changes in v4:
- Update the comment about the cell ordering

Changes in v2:
- Put the GPIO cell last because acpi_gpiochip_add() calls
acpi_dev_clear_dependencies() and the clk + regulators must
be ready when this happens.
---
drivers/platform/x86/intel/int3472/tps68470.c | 35 +++++++++++++++----
1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c
index e95b0f50b384..05fcf35c1662 100644
--- a/drivers/platform/x86/intel/int3472/tps68470.c
+++ b/drivers/platform/x86/intel/int3472/tps68470.c
@@ -5,6 +5,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tps68470.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/tps68470.h>
#include <linux/regmap.h>

#include "common.h"
@@ -12,17 +13,13 @@
#define DESIGNED_FOR_CHROMEOS 1
#define DESIGNED_FOR_WINDOWS 2

+#define TPS68470_WIN_MFD_CELL_COUNT 3
+
static const struct mfd_cell tps68470_cros[] = {
{ .name = "tps68470-gpio" },
{ .name = "tps68470_pmic_opregion" },
};

-static const struct mfd_cell tps68470_win[] = {
- { .name = "tps68470-gpio" },
- { .name = "tps68470-clk" },
- { .name = "tps68470-regulator" },
-};
-
static const struct regmap_config tps68470_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -105,10 +102,17 @@ static int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
static int skl_int3472_tps68470_probe(struct i2c_client *client)
{
struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+ struct tps68470_clk_platform_data clk_pdata = {};
+ struct mfd_cell *cells;
struct regmap *regmap;
int device_type;
int ret;

+ ret = skl_int3472_get_sensor_adev_and_name(&client->dev, NULL,
+ &clk_pdata.consumer_dev_name);
+ if (ret)
+ return ret;
+
regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap));
@@ -126,9 +130,26 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client)
device_type = skl_int3472_tps68470_calc_type(adev);
switch (device_type) {
case DESIGNED_FOR_WINDOWS:
+ cells = kcalloc(TPS68470_WIN_MFD_CELL_COUNT, sizeof(*cells), GFP_KERNEL);
+ if (!cells)
+ return -ENOMEM;
+
+ /*
+ * The order of the cells matters here! The clk must be first
+ * because the regulator depends on it. The gpios must be last,
+ * acpi_gpiochip_add() calls acpi_dev_clear_dependencies() and
+ * the clk + regulators must be ready when this happens.
+ */
+ cells[0].name = "tps68470-clk";
+ cells[0].platform_data = &clk_pdata;
+ cells[0].pdata_size = sizeof(clk_pdata);
+ cells[1].name = "tps68470-regulator";
+ cells[2].name = "tps68470-gpio";
+
ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
- tps68470_win, ARRAY_SIZE(tps68470_win),
+ cells, TPS68470_WIN_MFD_CELL_COUNT,
NULL, 0, NULL);
+ kfree(cells);
break;
case DESIGNED_FOR_CHROMEOS:
ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
--
2.33.1
\
 
 \ /
  Last update: 2021-11-25 17:57    [W:0.123 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site