lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] mfd: atmel-flexcom: use resume_noirq
On Thu, 28 Oct 2021, Claudiu Beznea wrote:

> Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
> mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
> be connected critical devices (like PMIC) which on suspend/resume should
> be suspended/resumed at the end/beginning. i2c uses
> .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
> to use .resume_noirq as it should be resumed before the embedded IPs.
> Otherwise the embedded devices might behave badly.
>
> Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
> drivers/mfd/atmel-flexcom.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)

Applied, thanks.

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2021-11-24 16:36    [W:0.063 / U:1.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site